Leverage what you have learned about Vulnerability and Penetration Testing to use Wireshark. Download and install Wireshark using the link provided in this lesson. You can install it on your own PC or into a VM. Use Wireshark to run a packet capture of at least one minute in length on your own home network or the virtual network provided by your virtualization software if running a VM. Save the packet capture. Review it and answer the following questions:
How many packets did you capture?
List at least three types of packets you captured.
How many IP addresses (source and destination) were in the capture?

The ISPM 15 (International Standards for Phytosanitary Measures No. 15) code/markings are used for a specific purpose related to international trade and the movement of wood packaging materials (WPM). The primary objective of ISPM 15 is to prevent the spread of pests and diseases that can be carried by wood packaging materials.

Wood packaging materials, such as pallets, crates, and dunnage, can harbor harmful insects and pathogens. When these materials are transported across international borders, there is a risk of introducing pests or diseases to new regions, which can have devastating consequences for agriculture, forestry, and ecosystems.

To address this risk, the ISPM 15 code/markings set out guidelines for treating WPM through approved methods such as heat treatment or fumigation. Treated WPM is then marked with a specific stamp or branding that certifies its compliance with ISPM 15 standards. This marking serves as evidence that the wood packaging has undergone appropriate treatment, reducing the risk of pest or disease transmission.

The use of ISPM 15 code/markings promotes phytosanitary measures and helps ensure that international trade involving wood packaging materials is conducted in a manner that protects plant health and minimizes the spread of pests and diseases across borders.

To learn more about phytosanitary, visit:

https://brainly.com/question/33281097

#SPJ11

Answer:

Ctrl A and then Ctrl C

Explanation:

First click Ctrl A then click on the parts that you need to copy then click Ctrl C

Answer: If you want to use a for loop then you should make it so that it does variable I and then it takes the array and you do Topscorers[I] and then it will do the first 5

Explanation:

Answer:

last in, first out, or LIFO behavior

Explanation:

B

The probability that the intruder withdraws the special file is 1/k.

To learn more about dividing probability refer to:

https://brainly.com/question/29844780

#SPJ4

A technician has been tasked with limiting the users who can connect to a network printer located centrally within an office environment. ACL would be the BEST to utilize to achieve this goal. Thus, option B is correct.

A network printer is one that can be used by other computers on the network because it is connected to a network and is therefore accessible via a network connection. It is possible for the printer to connect to a single, dedicated computer via its own network or via a local network.

Fast printers connected to a network are called network printers and are used for user sharing. Network printers, as opposed to local printers attached to your PC directly, can only be used once you log into the network. The network printers in your department or office are then accessible for use. For example, PQ HPLJ5SI 1, which you had to tell the PC to print to, is the name given to each printer in the office to help you identify it.

Learn more about network printer

https://brainly.com/question/15298311

#SPJ4

Answer:

"the span was so long, the height so great"

Explanation:

Just did on Edge 2020 and got it right.

Answer:”the span was so long, the height so great”

Explanation:

Answer:

Explanation:meeeeeeeeeeeeeeeeee

Answer: ok

Explanation:

Easy

In the context of GPS-enabled location-based services, the ability to see another person's location is an example of a tracking service.

GPS-enabled location-based services are smartphone applications that use the device's location information to deliver services, content, or advertising relevant to a user's current location.

Users can receive information on restaurants, shops, events, and other points of interest within their current location, as well as reviews, ratings, and recommendations for these locations.

Learn more about GPS at:

https://brainly.com/question/14897262

#SPJ11

The project plan is put into action and the project work is completed during the third phase, the implementation phase.

During implementation, it is critical to maintain control and communicate as needed. The Initiation Phase is the stage of the project lifecycle in which the project proposal is defined, assessed, and then approved for implementation by the Project Sponsor and the Vice Chancellor/Chief Information Officer. Each kid contributes to the representation of what he or she is learning, and each child can work at his or her own level in terms of basic skills, building, drawing, music, and dramatic play.

Learn more about information here-

https://brainly.com/question/15709585

#SPJ4

Answer:

1. hardware

2. USB

3. DSLR

4. Image processing

5.Flash Drive

Explanation:

I checked with my dad who works in IT so they're correct :)

Answer:

AMC Rosemary Square 12 and Apple The Gardens Mall and Muvico Theaters Automatic Ticketing and Rosemary Square and Apple Wellington Green and Walmart Supercenter

Explanation:

Manufacturing encompasses a wide range of technologies. Two examples include additive manufacturing (3D printing) and computer numerical control (CNC) machining.

Additive manufacturing offers advantages like design flexibility and reduced material waste but may have limitations in terms of speed and material choices. CNC machining provides high precision and versatility but can be costly and time-consuming for complex designs.

Additive Manufacturing (3D Printing): Additive manufacturing is a technology that builds objects layer by layer using digital design data. It offers several advantages such as design flexibility, rapid prototyping, and reduced material waste. With 3D printing, complex geometries and customized designs can be easily produced. It also enables on-demand production and decentralized manufacturing. However, there are limitations to consider. The speed of 3D printing can be relatively slow compared to traditional manufacturing methods. Certain materials may be more challenging to use, and the quality of printed parts may vary. Additionally, the initial investment cost for equipment and maintenance can be high.

Computer Numerical Control (CNC) Machining: CNC machining is a subtractive manufacturing process that uses pre-programmed computer software to control machine tools. It offers high precision, repeatability, and versatility for a wide range of materials. CNC machines can produce complex and intricate parts with tight tolerances. They are suitable for both prototyping and large-scale production. However, CNC machining also has its drawbacks. The setup and programming time can be time-consuming, especially for complex designs. The cost of CNC machines and their maintenance can be relatively high. Additionally, for certain designs, material waste can be significant due to the nature of the subtractive process.

Understanding the pros and cons of different manufacturing technologies helps organizations make informed decisions about the most suitable approach for their specific manufacturing needs. Factors such as design complexity, required precision, production volume, and cost considerations play crucial roles in selecting the appropriate technology.

Learn more about Additive manufacturing here:

https://brainly.com/question/31058295

#SPJ11

Data is stored in binary on computers. In addition to being a trustworthy method of storing data, binary is the only system that computers can comprehend. Transistors in a computer's primary memory alternate between high and low voltage levels, sometimes at 5V and other times at 0.

The binary number system uses two distinctive digits to represent numerical values (0 and 1). The majority of computing systems employ binary numbering, which interprets a voltage input of 0 as off and a voltage input of 1 as on, to represent the on/off state of electronic circuits (i.e., switches).

The binary number system, often known as the base-2 number system, is a way of expressing numbers that uses just two permutations of the digits zero (0) and one (1) to denote counting (1). All of the data that computers process and store, including numbers, words, films, pictures, and music, is done so using the binary number system.

Learn more about Binary Number here:

https://brainly.com/question/28222245

#SPJ2

Answer:

The answer is "Choice C"

Explanation:

The server is a computer or network which supplies other devices called clients through a net with resources, data or applications, or programs. Source Server allows a client can retrieve the cells are attached to the source code for a program. All required source control files were retrieved by the source server. Its app must've been indexed to source in enabled to use source server.

The loop that prints the numbers 1, 3, 5, 7, …, 99 is:

c = 1

while (c <= 99):

   print(c)

   c = c + 2

This loop initializes the variable c to 1, then enters a while loop that continues as long as c is less than or equal to 99.

During each iteration of the loop, the value of c is printed using the print function, and then c is incremented by 2 using the c = c + 2 statement.

This means that the loop prints out every other odd number between 1 and 99, inclusive.

Read more about loops here:

https://brainly.com/question/19344465

#SPJ1

The flow diagram for the given process is shown below.  The bottleneck is the part of the process that limits the maximum capacity for driver license.

In the given process, the bottleneck is the road exam, where 40% of the driver's license applicants fail to fulfill the step's requirements.(iii) Maximum Capacity of the Process:  The maximum capacity of the process can be calculated by finding the minimum of the capacities of each step.  Capacity of the identification process = (1 - 0.10) × 480/5

= 86.4 applicants/dayCapacity of the written exam process

= (1 - 0.15) × 480/3

= 102.4

applicants/dayCapacity of the road exam process = (1 - 0.40) × 480/20

= 28.8 applicants/day

Therefore, the maximum capacity of the process is 28.8 applicants/day.Staff Required for 100 Newly-Licensed Drivers per Day:  Let the staff required at the identification, written exam, and road exam steps be x, y, and z respectively.  From the above calculations, we have the following capacities:86.4x + 102.4y + 28.8z = 100/0.85

To know more about driver visit:

https://brainly.com/question/30485503

#SPJ11

The ways to make a benefit analysis paper are:

A cost-benefit analysis is known to be the act of making a comparison of the projected or the  estimated costs as well as the benefits (or a given opportunities) that is known to be linked with a project decision to know or tell if if it makes any sense from a given business perspective.

Note that the  Benefit Analysis report gives a kind of clear and concise form of comparisons of work scenarios to reduce over payment and as such, The ways to make a benefit analysis paper are:

Learn more about benefit analysis from

https://brainly.com/question/199821
#SPJ1

The three important principle in photography are;

Photography is about light. Without it, you couldn't even take images, let alone excellent ones.

The quality of light varies from one to photograph, yet it is always what gives your photographs their underlying structure. It doesn't get any more basic than that.

Most of us snap photos because something catches our attention.

Unsurprisingly, that "something" is your subject.

If you're explaining a photograph to someone else, the topic is most likely the first thing you'll mention.

Finally, the composition is the third and most important aspect of every shot.

Simply said, composition is the arrangement of the things in your shot. It includes your camera position, the connections between photo elements, and the things you accentuate, deemphasize, or altogether eliminate. Composition is the method through which you communicate your tale.

Learn more about photography:
https://brainly.com/question/30685203
#SPJ1

word = input("Enter a word: ")

for x in word:

   print(x*2, end="")

first, get the user input for the word. Then, using a for loop, iterate through the user's word. Print each letter twice (that's what the times 2 is used for) and end the print statement with no new line.

C. How people can share knowledge and learn from others online

Explanation:

software must be used by well trained staff.

Answer:

^8

4.2f

Explanation:

'{:^8}{:4.2f}' .format('Root', 0.2345789)

The ^ symbol centers 'Root' in a field eight characters wide.

4.2f rounds to two decimal places and places the number in a field 4 characters wide.

4.2f, '{:^8}{:4.2f}' .format('Root', 0.2345789). The ^ symbol centers 'Root' in a field eight characters wide. 4.2f rounds to two decimal places and places the number in a field 4 characters wide.

Consider a rectangular wing mounted in a low-speed subsonic wind tunnel. The wing model completely spans the test-section, so that the flow "sees" essentially an infinite wing. The wing has a NACA 23012 airfoil section and a chord of 0.23 m, where the lift on the entire wing is measured as 200 N by the wind tunnel force balance.

Determine the angle of attack if the wing span, airflow pressure, temperature, and velocity are 2 m, 1 atm, 303 K, and 42 m/s, respectively. Refer to the Appendix graphs given below for standard values" is in the attachment.

The wing has a NACA 23012 airfoil section and a chord of 0.23 m, where the lift on the entire wing is measured as 200 N by the wind tunnel force balance. Determine the angle of attack if the wing span, airflow pressure, temperature, and velocity are 2 m, 1 atm, 303 K, and 42 m/s, respectively.

Therefore, If the test-section air temperature is 510°R and the flow velocity is increased to 450 ft/s.

Learn more about temperature on:

https://brainly.com/question/11464844

#SPJ2

When the binary operator >> is used with an input stream object, such as cin, it is called the stream extraction operator. The left-side operand >> must be an input stream variable, such as cin; the right-side operands must be a variable.

What is the input stream object .An input stream is a sequence of input characters of indefinite length. In C++, to read data from the console, we utilize the input stream object cin. When we write cin >> variable, the input is stored in the variable, and the input ends when we press enter.

When the binary operator >> is used with an input stream object, it is called the stream extraction operator.What is the left-side operand >> and right-side operand.The left-side operand >> must be an input stream variable, such as cin; the right-side operands must be a variable.

The left side operand is the input stream object, which is generally cin in C++ and the right-side operand is a variable in which we want to store the input.

To know more about binary operator visit:

https://brainly.com/question/31228967

#SPJ11

Suppose you have a hard disk with 2200 tracks per surface, each track divided into 110 sectors, six platters, and a block size of 512 bytes (i.e., 1 /2 kilobyte), then the total raw capacity of the disk drive is 13.4 GB.

A hard disk drive (HDD) is a data storage device that uses magnetic storage to store and retrieves digital data using one or more rigid rapidly rotating disks (platters) covered in magnetic material. A hard disk drive is a random-access memory device (RAM), meaning that data can be read or written in almost any order after the first write operation has been completed.

Suppose you have a hard disk with 2200 tracks per surface, each track divided into 110 sectors, six platters, and a block size of 512 bytes (i.e., 1 /2 kilobyte), then the total raw capacity of the disk drive is 13.4 GB. The formula to calculate the total raw capacity of the disk drive is given:

Total raw capacity = Number of surfaces × Number of tracks per surface × Number of sectors per track × Block size per sector × Number of platters

We are given: Number of surfaces = 2

Number of tracks per surface = 2200

Number of sectors per track = 110

Block size per sector = 512 bytes

Number of platters = 6

Now, let's substitute these values in the above formula:

Total raw capacity = 2 × 2200 × 110 × 512 × 6

= 13,428,480,000 bytes = 13.4 GB

Therefore, the total raw capacity of the disk drive is 13.4 GB.

You can learn more about disk drives at: brainly.com/question/2898683

#SPJ11

To ensure that Active Directory domain user Alice does not have read access to the folder named Graphics, you need to modify the folder permissions on the NTFS partition.

The Graphics folder is shared to the network from the server named FS0. Here's what you should do:Locate the Graphics folder and right-click it, then click Properties.In the Properties dialog box, click the Security tab, then click Edit.

In the Permissions dialog box, click Add.In the Enter the object names to select box, type Alice, then click OK.In the Permissions for Alice section, select the Read checkbox and click the Deny checkbox.Click OK, then click OK again on the Security tab of the Graphics Properties dialog box.After performing these steps, Alice will not have access to the Graphics folder.

To know more about Active Directory visit:

https://brainly.com/question/31766282

#SPJ11

Firmware is code that provides instructions to hardware. Firmware is stored in read-only memory (ROM) and is typically used to boot the device and run its basic functions.

Firmware can be updated to fix bugs or add new features, but this requires specialised knowledge and tools.

Firmware is a type of software that is stored on a hardware device, such as a computer’s BIOS chip. Firmware is used to perform low-level tasks and is usually not updated or replaced by users. However, in some cases, users may need to update their firmware in order to fix bugs or add new features.

As of January 2020, Microsoft no longer provides support services for:

This means that users of these operating systems will no longer receive security updates or other patches from Microsoft. While users are still able to use these operating systems, it is generally recommended that they upgrade to a newer version of Windows in order to stay secure.

Learn more about Windows at: https://brainly.com/question/14531631

#SPJ4

Answer:

call center/phone/fax.....

Changing context typically refers to switching between different contexts or environments within a software application or system. It does not specifically relate to changing login departments.The statement is false.

A software application, commonly referred to as an "app," is a program or set of programs designed to perform specific tasks or functions on a computer or mobile device. These applications can range from simple programs that perform basic functions to complex applications that offer advanced features and capabilities.

Desktop Applications: These applications are designed to run on personal computers or laptops. They provide a wide range of functionalities, such as word processing, spreadsheet management, graphic design, video editing, and more. Examples include Microsoft Office Suite (Word, Excel, PowerPoint), Adobe Photoshop, and VLC Media Player.

Therefore, The statement is false.

Learn more about Desktop Applications on:

https://brainly.com/question/31783966

#SPJ1