In _____________ compression design the signal is split at the input, and one signal is used to compress the other slightly delayed split signal.
Answers
Answer:
Feed Forward
Explanation:
In FEED FORWARD compression design the signal is split at the input, and one signal is used to compress the other slightly delayed split signal.
I hope it helps! Have a great day!
Related Questions
Answer the question on the image and a brianiest will be given to the person that provided the right answer to it.
Answers
Answer:
(a) The distance up the slope the wagon moves before coming to rest is approximately 21.74 m
(b) The distance the wagon comes to rest from the starting point is approximately 12.06 m
(c) The value of 'U' at which the wagon should be propelled if it is to come finally to rest at its starting point is approximately 3.214 m/s (the difference in value can come from calculating processes)
Explanation:
The wagon motion parameters are;
The mass of the wagon, m = 7,200 kg
The initial velocity with which the wagon is projected along the horizontal rail, v = U
The length of the horizontal portion of the rail = 100 m
The angle of inclination of the inclined portion of the rail, θ = sin⁻¹(0.01)
The exerted frictional resistance to motion of the rail, \(F_f\) = 140 N
∴ θ = sin⁻¹(0.01)
The work done by the frictional force on the horizontal portion of the rail = 140 N × 100 m = 14,000 J
(a) If U = 3 m/s, we have;
Kinetic energy = 1/2·m·v²
The initial kinetic energy of the wagon, K.E. is given with the known parameters as follows;
K.E. = 1/2 × 7,200 kg × (3 m/s)² = 32,400 J
The energy, E, required to move a distance, 'd', up the slope is given as follows;
E = \(F_f\) × d + m·g·h
Where;
\(F_f\) = The friction force = 140 N
m = The mass of the wagon = 7,200 kg
g = The acceleration due to gravity ≈ 9.81 m/s²
h = The height reached = d × sin(θ) = d × 0.01
Therefore;
E = 140 N × d₁ + 7,200 kg × 9.81 m/s² × d₁ × 0.01 = 846.32 N × d
The energy, \(E_{NET \ horizontal}\), remaining from the horizontal portion of the rail is given as follows;
\(E_{NET \ horizontal}\) = Initial kinetic energy of the wagon - Work done on frictional resistance on the horizontal portion of the rail
∴ \(E_{NET \ horizontal}\) = 32,400 J - 14,000 J = 18,400 J
\(E_{NET \ horizontal}\) = 18,400 J
Therefore, for the wagon with energy, \(E_{NET \ horizontal}\) to move up the train, we get;
\(E_{NET \ horizontal}\) = E
∴ 18,400 J = 846.32N × d
d₁ = 18,400 J/(846.36 N) ≈ 21.7401579 m
d₁ ≈ 21.74 m
The distance up the slope the wagon moves before coming to rest, d₁ ≈ 21.74 m
(b) Given that the initial velocity of the wagon, U = 3 m/s, the distance up the slope the wagon moves before coming to rest is given above as d₁ ≈ 21.74 m
The initial potential energy, PE, of the wagon while at the maximum height up the slope is given as follows;
P.E. = m·g·h = 7,200 kg × 9.81 m/s² × 21.74 × 0.01 m = 15,355.3968 J
The work done, 'W', on the frictional force on the return of the wagon is given as follows;
W = \(F_f\) × d₂
Where d₂ = the distance moved by the wagon
By conservation of energy, we have;
P.E. = W
∴ 15,355.3968 = 140 × d₂
d₂ = 15,355.4/140 = 109.681405714
Therefore;
The distance the wagon moves from the maximum height, d₂ ≈ 109.68 m
The distance the wagon comes to rest from the starting point, d₃, is given as follows;
d₃ = Horizontal distance + d₁ - d₂
d₃ = 100 m + 21.74 m - 109.68 m ≈ 12.06 m
The distance the wagon comes to rest from the starting point, d₃ ≈ 12.06 m
(c) For the wagon to come finally to rest at it starting point, we have;
The initial kinetic energy = The total work done
1/2·m·v² = 2 × \(F_f\) × d
∴ 1/2 × 7,200 × U² = 2 × 140 × d₄
d₄ = 100 + (1/2·m·U² - 140×100)
(1/2·m·U² - 140×100)/(m·g) = h = d₁ × 0.01
∴ d₁ = (1/2·m·U² - 140×100)/(m·g×0.01)
d₄ = 100 + d₁
∴ d₄ = 100 + (1/2·m·U² - 140×100)/(m·g×0.01)
∴ 1/2 × 7,200 × U² = 2 × 140 × (100 + (1/2 × 7,200 × U² - 140×100)/(7,200 × 9.81 ×0.01))
3,600·U² = 280·(100 + (3,600·U² - 14,000)/706.32)
= 28000 + 280×3,600·U²/706.32 - 280 × 14,000/706.32
= 28000 - 280 × 14,000/706.32 + 1427.11518858·U²
3,600·U² - 1427.11518858·U² = 28000 - 280 × 14,000/706.32
U²·(3,600 - 1427.11518858) = (28000 - 280 × 14,000/706.32)
U² = (28000 - 280 × 14,000/706.32)/(3,600 - 1427.11518858) = 10.3319363649
U = √(10.3319363649) = 3.21433295801
The value of 'U' at which the wagon should be propelled if it is to come finally to rest at its starting point is U ≈ 3.214 m/s
Percentage error = (3.214-3.115)/3.214 × 100 ≈ 3.1% < 5% (Acceptable)
The difference in value can come from difference in calculating methods
The smoke detector project is a home automation project which uses the smoke sensor to detect the smoke. This smoke detection task is controlled by using the PIC controller. If the sensor detects any smoke in the surroundings, it will alert the user by sounding the alarm (piezo buzzer) and lighting the LED. Use PORTB as input and PORTD as an output port. Draw a block diagram of the system. (5 marks) [CLO1,C3] Design the schematic circuit to perform that system. (5 marks) [CLO2 C6] Construct and simulate a C language program using PIC 16F / 18F to implement the system. (15 marks) [CLO3,P4]
Answers
A smoke detector project is a home automation project that can detect smoke by using the smoke sensor. The PIC controller is used to control the smoke detection task. The alarm (piezo buzzer) will sound and the LED will light up if any smoke is detected in the surroundings. The input is PORTB, and the output is PORTD.
The block diagram of the system is as follows: PIC Controller Smoke Sensor Piezo BuzzerLEDPORTBPORTDThe schematic circuit of the system is shown below: The C language program for the smoke detector project using PIC 16F/18F is shown below. To run this program, you'll need a PIC microcontroller, a smoke sensor, a piezo buzzer, and an LED. // Declare variables for sensor and output portschar sensor = 0, buzzer = 0, led = 0;void main() { // Configure PORTB pins as input and PORTD pins as outputTRISB = 0b11111111;TRISD = 0b00000000;
// Set the initial state of the output ports as LOWPORTD = 0b00000000; // Loop indefinitelywhile (1) { // Read the input from the sensorPORTB.F0 = sensor; // If smoke is detected, sound the alarm (piezo buzzer) and light up the LEDif (sensor == 1) { PORTD.F0 = 1; // Set the buzzer and LED pins as HIGHPORTD.F1 = 1; } // If smoke is not detected, turn off the alarm (piezo buzzer) and LEDelse { PORTD.F0 = 0; // Set the buzzer and LED pins as LOWPORTD.F1 = 0; } }} The above code will produce the desired output.
To know more about automation visit:
https://brainly.com/question/1142564
#SPJ11
The process by which natural forces move weathered rock and soil from one place to another is called
a)soil conservation. b)deposition. c)abrasion. d)erosion
Answers
Answer:
Erosion is the geological process in which earthen materials are worn away and transported by natural forces such as wind or water. A similar process, weathering, breaks down or dissolves rock, but does not involve movement.Erosion is the opposite of deposition, the geological process in which earthen materials are deposited, or built up, on a landform.
Most erosion is performed by liquid water, wind, or ice (usually in the form of a glacier). If the wind is dusty, or water or glacial ice is muddy, erosion is taking place. The brown color indicates that bits of rock and soil are suspended in the fluid (air or water) and being transported from one place to another. This transported material is called sediment.
Explanation:
Physical erosion describes the process of rocks changing their physical properties without changing their basic chemical composition. Physical erosion often causes rocks to get smaller or smoother. Rocks eroded through physical erosion often form clastic sediments. Clastic sediments are composed of fragments of older rocks that have been transported from their place of origin.Landslides and other forms of mass wasting are associated with physical weathering. These processes cause rocks to dislodge from hillsides and crumble as they tumble down a slope.
Landslides and other forms of mass wasting are associated with physical weathering. These processes cause rocks to dislodge from hillsides and crumble as they tumble down a slope.
Plant growth can also contribute to physical erosion in a process called bioerosion. Plants break up earthen materials as they take root, and can create cracks and crevices in rocks they encounter.
I HOPE I HELPED YOUwhile using tableau a table in your data stores patient information, and has PatientID and PatientName fields. Which scenario requires using a join operation?
finding the PatientID corresponding to a given PatientName
counting how many patient records are in the table
connecting those patients to records in a different table
combing the PatientID data with the PatientName
Answers
Using a join operation is necessary when you want to associate the patient records from the table containing PatientID and PatientName fields with records in a separate table.
How is it necessary to perform a join operation in Tableau?In Tableau, a join operation is required when you need to combine the patient information stored in one table, specifically the PatientID and PatientName fields, with related data from another table. By performing a join, you can establish a connection between the patient records in both tables based on a common field, such as the PatientID.
This allows you to retrieve comprehensive information about the patients, including data from other relevant tables, such as medical records, treatment history, or demographic details. By linking the patient records through a join operation, you gain the ability to analyze and visualize data across different tables, enabling deeper insights into patient healthcare, outcomes, and trends.
Learn more about patient information
brainly.com/question/31350501
#SPJ11
Write a Matlab function, call it quadroots, that takes a, b, c as input and returns the two roots as output. The function may start like this: function [ri, r2] quadroots (a,b,c) % input: a, b, c: coefficients for the polynomial ax^2 bx c-o. % output: r1, r2: The two roots for the polynomial.
Answers
The MATLAB function "quadroots" is designed to calculate the roots of a quadratic equation based on the input coefficients a, b, and c. The function takes these coefficients as inputs and returns the two roots, r1 and r2, as outputs.
By utilizing the quadratic formula, the function computes the roots of the equation and provides them as the final result. The "quadroots" function in MATLAB is implemented as follows:
```matlab
function [r1, r2] = quadroots(a, b, c)
% input: a, b, c: coefficients for the polynomial ax^2 + bx + c = 0
% output: r1, r2: The two roots for the polynomial
% Compute the discriminant
D = b^2 - 4*a*c;
% Calculate the roots
r1 = (-b + sqrt(D)) / (2*a);
r2 = (-b - sqrt(D)) / (2*a);
end
```
Inside the function, the discriminant (D) is calculated using the coefficients a, b, and c. The discriminant determines the nature of the roots and is used to handle different cases, such as real and distinct roots, real and equal roots, or complex roots. The roots are then computed using the quadratic formula and assigned to the variables r1 and r2. Finally, the function returns the two roots as the output. By using the "quadroots" function, one can easily calculate the roots of a quadratic equation in MATLAB by providing the appropriate coefficients.
learn more about Polynomial here:
https://brainly.com/question/11536910
#SPJ11
Identify the right statement about Zener diode a. Rectifier diode b. Constant voltage device c. Constant current device d. Works in the Forward Region
Answers
A Zener diode is a constant voltage device. It works in the reverse-biased condition and keeps the voltage across the diode constant at a particular level when the current through the circuit varies.
Hence, the correct statement about Zener diode is that it is a constant voltage device.
What is a Zener Diode?
A Zener diode is a special type of diode that is designed to operate in the reverse breakdown region of the diode's voltage-current characteristic curve.
The reverse breakdown occurs at a predetermined voltage, known as the Zener voltage or the breakdown voltage.
When a Zener diode is used in a circuit, it functions as a voltage regulator.
It maintains a constant voltage across its terminals as long as the current through it is within a specified range.
Zener diodes are often used as shunt regulators in power supplies to maintain a constant output voltage under varying load conditions.
They are also used in voltage reference circuits, noise suppression circuits, and in protection circuits to prevent damage from voltage spikes or surges.
In conclusion, a Zener diode is a constant voltage device that is designed to operate in the reverse breakdown region of its voltage-current characteristic curve.
It functions as a voltage regulator, maintaining a constant voltage across its terminals within a specified range of current.
To know more about Zener diode , visit:
https://brainly.com/question/13800609
#SPJ11
Who is responsible for providing working conditions which are free from fall dangers?
Answers
Answer:
I am pretty confident it is the Employer!
Explanation:
They have the responsibility to provide a safe workplace that is free from serious hazards, according to the General Duty Clause of the OSH Act (OSHA Standards)
I hope this helped you!! :D
Answer:
Employers
Explanation:
OSHA requires employers to: Provide working conditions that are free of known dangers. Keep floors in work areas in a clean and, so far as possible, a dry condition. Select and provide required personal protective equipment at no cost to workers.
What is the acceleration of a 0.8 kg vehicle powered by 0.07 N of force?
Answers
Using the Newton's second law of motion we will see that the acceleration is 0.0875 m/s^2.
What is the acceleration of the vehicle?The acceleration of a vehicle is determined by the force acting on it and its mass, as described by Newton's second law of motion:
F = m * a
where F is the force acting on the object, m is the mass of the object, and a is the resulting acceleration.
In this case, the force acting on the vehicle is 0.07 N, and the mass of the vehicle is 0.8 kg. Substituting these values into the equation above, we get:
0.07 N = 0.8 kg * a
Solving for a, we get:
a = 0.07 N / 0.8 kg
a = 0.0875 m/s^2
Therefore, the acceleration of the 0.8 kg vehicle powered by 0.07 N of force is 0.0875 m/s^2.
Learn more about acceleration at:
https://brainly.com/question/460763
#SPJ1
Draw an ERD for each of the following situations. (If you believe that you need to make additional assumptions, clearly state them for each situation.) Draw the same situation using the tool you have been told to use in the course. a. A company has a number of employees. The attributes of EMPLOYEE include Employee ID (identifier), Name, Address, and Birthdate. The company also has several projects. Attributes of PROJECT include Project ID (identifier), Project Name, and Start Date. Each employee may be assigned to one or more projects or may not be assigned to a project. A project must have at least one employee assigned and may have any number of employees assigned. An employee's billing rate may vary by project, and the company wishes to record the applicable billing rate (Billing Rate) for each employee when assigned to a particular project. Do the attribute names in this description follow the guidelines for naming attributes? If not, suggest better names. Do you have any associative entities on your ERD? If so, what are the identifiers for those associative entities? Does your ERD allow a project to be created before it has any employees assigned to it? Explain. How would you change your ERD if the Billing Rate could change in the middle of a project? b. A laboratory has several chemists who work on one or more projects. Chemists also may use certain kinds of equipment on each project. Attributes of CHEMIST include Employee ID (identifier), Name, and Phone No. Attributes of PROJECT include Project ID (identifier) and Start Date. Attributes of EQUIPMENT include Serial No and Cost The organization wishes to record Assign Date—that is, the date when a given equipment item was assigned to a particular chemist working on a specified project A chemist must be assigned to at least one project and one equipment item. A given equipment item need not be assigned, and a given project need not be assigned either a chemist or an equipment item. Provide good definitions for all of the relationships in this situation. c. A college course may have one or more scheduled sections or may not have a scheduled section. Attributes of COURSE include Course ID, Course Name, and Units. Attributes of SECTION include Section Number and Semester ID. Semester ID is composed of two parts: Semester and Year. Section Number is an integer (such as 1 or 2) that distinguishes one section from another for the same course but does not uniquely identify a section. How did you model SECTION? Why did you choose this way versus alternative ways to model SECTION? d. A hospital has a large number of registered physicians. Attributes of PHYSICIAN include Physician ID (the identifier) and Specialty. Patients are admitted to the hospital by physicians. Attributes of PATIENT include Patient ID (the identifier) and Patient Name. Any patient who is admitted must have exactly one admitting physician. A physician may optionally admit any number of patients. Once admitted, a given patient must be treated by at least one physician. A particular physician may treat any number of patients, or may not treat any patient& Whenever a patient is treated by a physician, the hospital wishes to record the details of the treatment (Treatment Detail). Components of Treatment Detail include Date, Time, and Results. Did you draw more than one relationship between physician and patient? Why or why not? Did you include hncnithi ac an antitv type? Why or why not?
Answers
Answer:
it wqas red
Explanation:
red
A scale on a blue print drawing of a house shows that 666 centimeters represents 333 meters.
What number of centimeters on the blue print represents an actual distance of 272727 meters?
Answers
Answer:
545454cm
Explanation:
The blue print drawing of the house shows 666 centimeters, but the real picture of the house is 333 meters. So let the number of cm on the blueprint that represent the distance of 272727 meters be x. Firstly convert the meters to centimeters 666cm = 333m, x=272727m ; then cross multiply, 666cm=33300cm x=27272700cm ; x =(666cm×272727cm)/33300cm =545454cm.
The width of a frictional material on a multiple disc clutch is (r2 -r1) and is equal to half of the maximum radius (R); The maximum diameter of the coupling is not to exceed 162 mm. What is the inside diameter in mm?
Answers
Since the width of a frictional material on a multiple disc clutch is (r₂ - r₁) the inside diameter of the multiple disc clutch is 81 mm
How to calculate the inside diameter multiple disc clutch?Let
w = width of frictional material r = inside radius multiple disc clutch and r = outside radius multiple disc clutchGiven that the width of a frictional material on a multiple disc clutch is (r₂ - r₁) and is equal to half of the maximum radius (R), we have that
w = r₂ - r₁ (1)and
w = R/2 (2)
Since R = r₂
w = r₂/2 (3)
Equating equations (1) and (3), we have
r₂ - r₁ = r₂/2
r₁ = r₂ - r₂/2
r₁ = r₂/2
Since the maximum diameter d₂ of the coupling is not to exceed 162 mm, we have that
r₂ = d₂/2
So, r₁ = r₂/2
r₁ = d₂/4
r₁ = 162 mm/4
r₁ = 40.5 mm
Now the inside diameter d₁ = 2r₁
So, d₁ = 2 × 40.5 mm
= 81 mm
So, the inside diameter of the multiple disc clutch is 81 mm
Learn more about inside diameter here:
https://brainly.com/question/27231407
#SPJ1
A sheet of steel 1.5 mm thick has nitrogen (N2) atmospheres on both sides at 1200°C and is permitted to achieve steady-state diffusion condition. The diffusion coefficient for N2 in steel at this temperature is 6 ´ 10-11 m2 /s, and the diffusion flux is found to be 1.2 ´ 10-7 kg/m2 -s. Also, it is known that the concentration of N2 in the steel at the high-pressure surface is 4 kg/m3 . How far into the sheet from the high-pressure side will the concentration be 2.0 kg/m3 ? Assume a linear concentration profile.
Answers
Answer:
do the wam wam
Explanation:
HELPPPPP Which option identifies the government agency responsible for monitoring the situation in the following scenario? A salmonella outbreak in 2012 was caused by frozen raw yellowfin tuna. More than 100 people became sick from eating the contaminated tuna. Food and Drug Administration Environmental Protection Agency Forest Service Department of Agriculture
Answers
Answer:
Food and drug admin
Explanation:
determine the components of each reaction at the ball and socket joint A and the tension in each cable necessary for equilibrium of the rod
Answers
The components of the reaction force in a ball and socket joint include the horizontal and vertical reaction forces.
What is a reaction force?A reaction force is an equal but oppositely directed force which forms a pair which the applied or action force.
Tension is a type of force which is present in a string or a rope supporting a body or object.
A ball and socket jont is a type of joint in the body which is able to rotate freely about an axis.
The components of the reaction force in a ball and socket joint include the horizontal and vertical reaction forces.
Learn more about reaction forces at: https://brainly.com/question/1013858
#SPJ1
a) Water strider bug is supported on surface of the pond by surface tension acting along interface between water and bug's legs. Determine the minimum length of this interface needed to support the bug let the weight of the bug is 10−4 N
b) Repeat part (a) if surface tension were to support aperson weighing 750N.
Answers
Using three separate situations, record your observations on the ways other drivers handle determining appropriate speed when changing lanes. Where were you? What time of day was it? Could a collision have occurred because of what you saw? Answer in a paragraph containing at least five sentences.
During the next week, observe other people’s driving while you are riding in a vehicle. Are drivers keeping enough space between their vehicles to allow for the total stopping distance? What will you do differently than the people and cars that you observed? Answer in a paragraph containing at least five sentences.
Answers
Answer:
Explanation: Changing Lanes Tip 1: scan Explanation: When scanning you check all your mirrors while looking at the road in between, this keeps you aware of your surroundings. Tip 2: check blind spotExplanation: When checking your blind spot you quickly glance to which way you want to change lanes for no more than 2 seconds. Your peripheral vision will pick up any lights or movement. Tip 3: use signals Explanation: When changing lanes use you signal to alert others around you even if no ones around
Hardening and Non-Hardening are two types of what?
Answers
Some common varieties of hardening include stress hardening, stable solution strengthening, precipitation hardening, and quenching and tempering Polymer, or non-harden, clay is a clay crafted from polymer polyvinyl chloride, or %. it's going to not harden whilst exposed to air
Hardening is the method of increasing the hardness of a steel. There are two foremost types of hardening strategies as case hardening and surface hardening. the principle difference among case hardening and surface hardening is that case hardening increases the hardness of the surface of the metal by using infusing factors into the materials floor, forming a thin layer of harder alloy whereas surface hardening increases the hardness of the floor even as the core remains rather smooth.
To know more about case hardening click right
https://brainly.com/question/20813115
#SJP4
For binary flash distillation, we discussed in class that there are 8 variables (F, ZA, V, ya, L, XA, P and T) and 4 equations derived from VLE and mass balances. Thus, we typically require 4 of these variables to be given so that we can obtain a unique solution to the problem. Let's say, your manager tells you that he has a feed mixture with 2 components (given F, za) and he requires you to come up with a flash column that can produce a certain desired amount of Vapor product (thus V, ya are specified). Identity of both components is known and all VLE data has been provided to you. Has the manager given you enough data? If yes, give a step-by-step description of how would you go about designing the flash column (basically find P and T)? If no, why?
Answers
Answer:
yes
Explanation:
ooooooooooooooooooooooooooooooo
What is anthropology? Discussion the types of anthropology?
Answers
Answer:
Anthropology is the systematic study of humanity, with the goal of understanding our evolutionary origins, our distinctiveness as a species, and the great diversity in our forms of social existence across the world and through time. The focus of Anthropology is on understanding both our shared humanity and diversity, and engaging with diverse ways of being in the world.
Anthropology is divided into three subfields: sociocultural, biological, and archaeology.
Explanation:
Have a great day!
The UHRS platform is optimized for Edge/Internet Explorer only. You can still use your favorite browser, but keep in mind that you may experience technical issues when working on UHRS with a different browser than Edge or Internet Explorer.
UHRS is optimized for...
Answers
It is to be noted that all UHRS platforms are optimized for the popular kinds of internet browser applications.
What is a UHRS?The Universal Human Relevance System (UHRS) is a crowdsourcing platform that allows for data labeling for a variety of AI application situations.
Vendor partners link people referred to as "judges" to offer data labeling at scale for us. All UHRS judges are bound by an NDA, ensuring that data is kept protected.
A browser is a software tool that allows you to see and interact with all of the knowledgeon the World Wide Web. Web sites, movies, and photos are all examples of this.
Learn more about internet browser applications.:
https://brainly.com/question/16829947
#SPJ1
A 4-L pressure cooker has an operating pressure of 175 kPa. Initially, one-half of the volume is filled with liquid and the other half with vapor. If it is desired that the pressure cooker not run out of liquid water for 75 min, determine the highest rate of heat transfer allowed.
Answers
Answer:
the highest rate of heat transfer allowed is 0.9306 kW
Explanation:
Given the data in the question;
Volume = 4L = 0.004 m³
V\(_f\) = V\(_g\) = 0.002 m³
Using Table ( saturated water - pressure table);
at pressure p = 175 kPa;
v\(_f\) = 0.001057 m³/kg
v\(_g\) = 1.0037 m³/kg
u\(_f\) = 486.82 kJ/kg
u\(_g\) 2524.5 kJ/kg
h\(_g\) = 2700.2 kJ/kg
So the initial mass of the water;
m₁ = V\(_f\)/v\(_f\) + V\(_g\)/v\(_g\)
we substitute
m₁ = 0.002/0.001057 + 0.002/1.0037
m₁ = 1.89414 kg
Now, the final mass will be;
m₂ = V/v\(_g\)
m₂ = 0.004 / 1.0037
m₂ = 0.003985 kg
Now, mass leaving the pressure cooker is;
m\(_{out\) = m₁ - m₂
m\(_{out\) = 1.89414 - 0.003985
m\(_{out\) = 1.890155 kg
so, Initial internal energy will be;
U₁ = m\(_f\)u\(_f\) + m\(_g\)u\(_g\)
U₁ = (V\(_f\)/v\(_f\))u\(_f\) + (V\(_g\)/v\(_g\))u\(_g\)
we substitute
U₁ = (0.002/0.001057)(486.82) + (0.002/1.0037)(2524.5)
U₁ = 921.135288 + 5.030387
U₁ = 926.165675 kJ
Now, using Energy balance;
E\(_{in\) - E\(_{out\) = ΔE\(_{sys\)
QΔt - m\(_{out\)h\(_{out\) = m₂u₂ - U₁
QΔt - m\(_{out\)h\(_g\) = m₂u\(_g\) - U₁
given that time = 75 min = 75 × 60s = 4500 sec
so we substitute
Q(4500) - ( 1.890155 × 2700.2 ) = ( 0.003985 × 2524.5 ) - 926.165675
Q(4500) - 5103.7965 = 10.06013 - 926.165675
Q(4500) = 10.06013 - 926.165675 + 5103.7965
Q(4500) = 4187.690955
Q = 4187.690955 / 4500
Q = 0.9306 kW
Therefore, the highest rate of heat transfer allowed is 0.9306 kW
how do we perceive a pole that partially covers a wall?
Answers
We perceive a pole that partially covers a wall, we can break it down into the following steps:
1. First, our eyes receive the visual information of the scene, which includes the wall and the pole.
2. Next, our brain processes this information and recognizes the two distinct objects - the wall and the pole.
3. Then, our brain interprets the spatial relationship between the objects, determining that the pole is in front of the wall and partially covering it.
4. Finally, our perception is formed, and we understand that we are seeing a pole partially covering a wall.
In summary, we perceive a pole that partially covers a wall by receiving visual information, processing it in our brain, and interpreting the spatial relationship between the objects.
To know more about wall
https://brainly.com/question/7667177?
#SPJ11
Tech A says that a parasitic draw is measured in volts. Tech B says that pulling fuses one at a time can help locate a parasitic draw. Who is correct
Answers
Answer:
Tech B
Explanation:
Alguien sabe cúal es la mayor medida de neumatico que cabe en una Honda CB1 11O?
Does anyone know what is the largest tire size that will fit on a Honda CB1 11O?
Answers
Which of the following are examples of
engineering controls? Select all that apply.
.
Steps for removing used medical exam gloves
Washing stations
Biohazard waste containers
Spill clean up kits
Sharps containers
Answers
The examples of engineering controls is Biohazard waste containers and Spill clean up kits.
What is engineering controls?An engineering controls is a workplace process that protect workers by removing hazardous conditions or by placing a barrier between the worker and the hazard.
An example of engineering controls is installation of exhaust ventilation to remove airborne emissions to shield the worker.
Hence, the examples of engineering controls is Biohazard waste containers and Spill clean up kits.
Therefore, the Option C and D is correct.
Read more about engineering controls
brainly.com/question/17483083
One of the major benefits gained by a firm entering the international market is the ability to achieve a competitive advantage through location.
True
False
Answers
One of the key benefits a company will encounter once it enters the global market is the possibility to create a competitive edge through location. Consequently, the statement is True.
What does the global market mean?Global marketing is the practice of advertising a company's products, brand, or services to a worldwide clientele. Parts of the process include planning, advertising, and focusing a product or service on the needs of potential clients in other countries. Fast food, clothing, automobiles, banking, and businesses that produce swiftly consumable goods are all examples of industries that engage in global marketing.
How do businesses succeed in the global market?A company's brand needs to resonate with the local culture in order to be successful there. Because of this, businesses that are receptive to new products and local marketing techniques frequently see larger returns on their investments.
To know more about Market visit:-
brainly.com/question/13414268
#SPJ4
Plumbing
The should indicate the materials, fixtures, and faucets to be
used.
A. specifications
B. plumbing code
C. mechanical code
D. plumbing instructor
Answers
Answer:
B....................
Use the HELPrct data from the mosaicData to calculate the mean of all numeric variables (be sure to exclude missing values)
Answers
To calculate the mean of all numeric variables in the HELPrct data from the mosaicData package, we can use the colMeans() function in R. This function calculates the mean of each column in a data frame.
However, it only works on numeric columns, so we need to first remove any non-numeric columns or missing values.
To do this, we can use the select_if() function from the dplyr package to only select columns that are numeric. Then, we can use the na.omit() function to remove any rows with missing values. Finally, we can use the colMeans() function to calculate the mean of each column.
Here's the code:
library(mosaicData)
library(dplyr)
# Select only numeric columns
numeric_cols <- select_if(HELPrct, is.numeric)
# Remove rows with missing values
numeric_cols <- na.omit(numeric_cols)
# Calculate column means
means <- colMeans(numeric_cols)
# Print the result
print(means)
This will give us the mean of each numeric column in the HELPrct data, excluding any missing values.
For more such questions on variables visit:
https://brainly.com/question/30317504
#SPJ11
The accompanying specific gravity values describe various wood types used in construction. 0.320.350.360.360.370.380.400.400.40 0.410.410.420.420.420.420.420.430.44 0.450.460.460.470.480.480.490.510.54 0.540.550.580.630.660.660.670.680.78 Construct a stem-and-leaf display using repeated stems. (Enter numbers from smallest to largest separated by spaces. Enter NONE for stems with no values.)
Answers
Answer:
\(\begin{array}{ccc}{Steam} & {\vert} & {Leaf} \ \\ \\ {0.3} & {\vert} & {2\ 5\ 6\ 6\ 7\ 8} \ \\ \\{0.4} & {\vert} & {0\ 0\ 0\ 1\ 1\ 2\ 2\ 2\ 2\ 2\ 3\ 4\ 5\ 6\ 6\ 7\ 8\ 8\ 9} \ \\ \ \\ {0.5} & {\vert} & {1\ 4\ 4\ 5\ 8} \ \\ \ \\ {0.6} & {\vert} & {3\ 6\ 6\ 7\ 8} \ \\ \ \\ {0.7} & {\vert} & {8} \ \ \end{array}\)
Explanation:
Given
\(0.32,\ 0.35,\ 0.36,\ 0.36,\ 0.37,\ 0.38,\ 0.40,\ 0.40,\ 0.40,\ 0.41,\)
\(0.41,\ 0.42,\ 0.42,\ 0.42,\ 0.42,\ 0.42,\ 0.43,\ 0.44,\ 0.45,\ 0.46,\)
\(0.46,\ 0.47,\ 0.48,\ 0.48,\ 0.49,\ 0.51,\ 0.54,\ 0.54,\ 0.55,\)
\(0.58,\ 0.63,\ 0.66,\ 0.66,\ 0.67,\ 0.68,\ 0.78.\)
Required
Plot a steam and leaf display for the given data
Start by categorizing the data by their tenth values:
\(0.32,\ 0.35,\ 0.36,\ 0.36,\ 0.37,\ 0.38.\)
\(0.40,\ 0.40,\ 0.40,\ 0.41,\ 0.41,\ 0.42,\ 0.42,\ 0.42,\ 0.42,\ 0.42,\)
\(0.43,\ 0.44,\ 0.45,\ 0.46,\ 0.46,\ 0.47,\ 0.48,\ 0.48,\ 0.49.\)
\(0.51,\ 0.54,\ 0.54,\ 0.55,\ 0.58.\)
\(0.63,\ 0.66,\ 0.66,\ 0.67,\ 0.68.\)
\(0.78.\)
The 0.3's is will be plotted as thus:
\(\begin{array}{ccc}{Steam} & {\vert} & {Leaf} \ \\ {0.3} & {\vert} & {2\ 5\ 6\ 6\ 7\ 8} \ \ \end{array}\)
The 0.4's is as follows:
\(\begin{array}{ccc}{Steam} & {\vert} & {Leaf} \ \\ {0.4} & {\vert} & {0\ 0\ 0\ 1\ 1\ 2\ 2\ 2\ 2\ 2\ 3\ 4\ 5\ 6\ 6\ 7\ 8\ 8\ 9} \ \ \end{array}\)
The 0.5's is as follows:
\(\begin{array}{ccc}{Steam} & {\vert} & {Leaf} \ \\ {0.5} & {\vert} & {1\ 4\ 4\ 5\ 8} \ \ \end{array}\)
The 0.6's is as thus:
\(\begin{array}{ccc}{Steam} & {\vert} & {Leaf} \ \\ {0.6} & {\vert} & {3\ 6\ 6\ 7\ 8} \ \ \end{array}\)
Lastly, the 0.7's is as thus:
\(\begin{array}{ccc}{Steam} & {\vert} & {Leaf} \ \\ {0.7} & {\vert} & {8} \ \ \end{array}\)
The combined steam and leaf plot is:
\(\begin{array}{ccc}{Steam} & {\vert} & {Leaf} \ \\ \\ {0.3} & {\vert} & {2\ 5\ 6\ 6\ 7\ 8} \ \\ \\{0.4} & {\vert} & {0\ 0\ 0\ 1\ 1\ 2\ 2\ 2\ 2\ 2\ 3\ 4\ 5\ 6\ 6\ 7\ 8\ 8\ 9} \ \\ \ \\ {0.5} & {\vert} & {1\ 4\ 4\ 5\ 8} \ \\ \ \\ {0.6} & {\vert} & {3\ 6\ 6\ 7\ 8} \ \\ \ \\ {0.7} & {\vert} & {8} \ \ \end{array}\)
a wrench used to measure resistance while applying a twisting force using a common socket, and whose values are stated in inch-pounds or foot-pounds, is called a
Answers
A wrench used to measure resistance while applying a twisting force using a common socket, and whose values are stated in inch-pounds or foot-pounds, is called a; Torque wrench.
The features of the wrench are given as;
Measurement of resistance Applying a twisting force via a common socketValues are in inch pounds or foot poundsThe correct answer is Torque wrench because a torque wrench is simply a tool that is used to apply a particular torque to a fastener such as a bolt.
Finally, this torque wrench is modeled in form of a socket wrench with some special internal mechanisms and their values are measured in inch pounds or foot pounds.Read more about wrenches at; https://brainly.com/question/15755085