Describe the role of C-S-H in providing strength for cement. Discuss which compounds produce C-S-H and why balancing the amounts of those compounds is important.
Answers
Answer:
Following are the solution to this question:
Explanation:
Whenever a chemical reaction occurs between water and cement the heat is released, and a \(CaOSiO_2H_2O\) (C-S-H gel) gel constructs gel is also recognized as "tobermorite gel."
This one gel acts like a pack of gum and also has a cement quality, that holds its particles intact and therefore contributes to the overall compression mix. An increase in supply explicitly causes the movement in the outcome of power. C3S and C2S are both the compounds of Bouge that produce hydration C-S-H gel.
It mixture must be balanced as \(Ca(OH)_2\) with C-S-H gel also is given as a byproduct. It \(Ca(OH)_2\) , that cause sudden with sulphate and form \(CaSO_4\) , is an unacceptable substance. Sulfate attack or later deterioration of its cement is caused by this \(CaSO_4\) .
All C3S and C2S generate various amounts of C-S-H gel so, the required strength can be maintained without compromising on real term durability.
Related Questions
technician a says to correct ride height by performing a wheel alignment. technician b says to check for bent suspension components if ride height is incorrect. who is right?
Answers
Technician A is right due to the fact if one facet is exceptional in peak it'll motive a pull. Ride height motive camber and need to be corrected earlier than any alignment adjustments.
To check ride height you could observe those steps:
Park the automobile on stage floor.Roll the automobile ahead and lower back permitting the suspension to relax.Grab your tape degree.Starting on the the front drivers facet wheel, degree from the middle of the wheel to the middle of the fender starting and note.Ride height or floor clearance may be defined as the quantity of area among the bottom of an vehicle tire and the bottom factor of the vehicle (normally the axle); or, greater properly, to the shortest distance among a flat, stage surface, and the bottom a part of a automobile apart from the ones elements designed to touch the floor.
Learn more about The Ride Height at https://brainly.com/question/28841987
#SPJ4
The code s1 = pd.Series([3, 0.5, 0.7, 0.9)) Will create a list of what datatype(s) integers strings mixture of datatypes floats
Answers
The code s1 = pd.Series([3, 0.5, 0.7, 0.9]) will create a pandas Series object that contains a mixture of data types, including integers and floats. Therefore, the code will create a list of the datatype "floats."
Here's a breakdown of the different datatypes mentioned:
1. Integers: Whole numbers without decimal points (e.g., 3, 7, -5)
2. Floats: Numbers with decimal points (e.g., 3.5, 7.0, -5.9)
3. Strings: Text or characters enclosed in single or double quotes (e.g., 'hello', "world")
In your code, the values 0.5, 0.7, and 0.9 are floats. Although 3 is an integer, Python will automatically convert it to a float to maintain a consistent datatype in the list. Therefore, the resulting datatype is 'floats'.
Learn more about datatypes here:
https://brainly.com/question/30154944
#SPJ11
Factors such as brake shoe orientation, pin location, and direction of rotation determine whether a particular brake shoe is considered to be self-energizing or self-deenergizing. Sketch a brake drum where the left shoe is self-energizing and the right shoe is self-deenergizing. Which shoe will produce more braking torque, assuming equal actuation forces and identical brake shoes
Answers
Answer:
Self energizing brake shoe produces more Torque
Explanation:
Attached below is the sketches of the various cases
The cases are :
case 1 ; deenergizing
case 2 ; self energizing
case 3 ; produces high braking torque
For a brake to be self energizing when the Frictional torque and braking torque are in the same direction
summary from equation 3
when: b > uc the brake is controllable
b = uc It is self locking
b < uc The brake is uncontrollable
What is the difference between class 1 and class 3 lever?
Answers
Answer:
the class is different and the topic treated in class 1 is different from class 3
When using vectorization in SIMD (Single Instruction Multiple Data) the vector size is not always the same depending on the processor architecture.
Group of answer choices
True
False
Answers
The given statement "When using vectorization in SIMD (Single Instruction Multiple Data) the vector size is not always the same depending on the processor architecture" is true because some processors may have vector registers that are 128 bits wide, while others may have registers that are 256 or 512 bits wide.
It's important to take into account the specific architecture being used when optimizing code for SIMD vectorization. Single Instruction Multiple Data (SIMD) is a type of parallel computing architecture in which a single instruction is executed simultaneously by multiple processing units, each operating on different sets of data.
In a SIMD architecture, a single instruction is broadcasted to multiple processing units, which then perform the same operation on different pieces of data in parallel. This enables a significant increase in processing speed and throughput for tasks that can be parallelized, such as image or signal processing, scientific simulations, and machine learning algorithms.
Learn more about Single Instruction Multiple Data: https://brainly.com/question/179886
#SPJ11
In a very short period of time, the ride-arranging service Uber has grown from a small San Francisco-based startup to a global transportation powerhouse that is redefining the transportation industry. It is not surprising, then, that several governments are receiving tremendous pressure from other transportation companies to prohibit Uber from operating in their nation or community. In an essay of approximately 225 words, describe Uber’s business model and why it is considered a threat to the livelihood of transportation companies and employees in many countries. Include in your review, suggestions as to how these long-established transportation providers might address the Uber threat.
Answers
The answer of the given question based on the Uber application startup
growing rapidly the answer is given below,
What is Uber’s business model?Uber's business model is based on a sharing economy concept, which uses a smartphone application to connect riders with drivers.
Uber is a ride-arranging service that uses a smartphone application to connect riders with drivers. The company's business model is based on a sharing economy concept, which allows people to share resources and services with each other through online platforms. The Uber business model is considered a threat to traditional transportation companies and employees because it provides an alternative to traditional taxi and transportation services, which are often more expensive and less efficient.
One of the main reasons why traditional transportation providers see Uber as a threat is that it allows anyone with a car to become a driver, which creates more competition for the traditional taxi industry. Uber's model also provides riders with a convenient and flexible transportation option, which is often more affordable than traditional taxi services.
To address the Uber threat, traditional transportation providers could consider implementing similar sharing economy concepts in their own business models. For example, they could develop their own smartphone applications that connect riders with drivers, or offer car-sharing services to customers. They could also consider lowering their prices and improving their services to compete with Uber.
Another approach for traditional transportation providers would be to work with Uber and other ride-sharing companies to find a mutually beneficial solution. For example, they could partner with Uber to offer combined services that provide customers with a wider range of transportation options. They could also work together to develop regulations and policies that ensure fair competition and protect the interests of all stakeholders involved.
Overall, traditional transportation providers will need to adapt to the changing transportation landscape and find new ways to remain competitive in the face of growing competition from ride-sharing companies like Uber.
To know more about Threat visit:
https://brainly.com/question/30369923
#SPJ1
5 kg of a wet steam has a volume of 2 m3
at a pressure of 200 kPa. If the volume remains
constant and heat is added until the pressure reaches 800 kPa, find the initial and final
dryness fraction of the steam.
(b) Calculate the heat input for the reversible process defined in the problem above.
Answers
differentiate between personal safety, machine safety and tools safety in a workshop
Answers
Answer:
Here are the differences between personal safety, machine safety, and tools safety in a workshop:
Personal Safety
Wear appropriate personal protective equipment (PPE), such as safety glasses, gloves, and a hard hat.Be aware of your surroundings and avoid distractions.Never work alone.Report any hazards to your supervisor.Machine Safety
Read and follow all operating instructions for each machine.Use the correct machine for the job.Make sure all guards and safety devices are in place and working properly.Do not overload machines.Keep machines clean and free of debris.Tools Safety
Use the correct tool for the job.Make sure tools are in good working order.Inspect tools before each use.Store tools properly.Do not use tools that are damaged or not working properly.Here are some additional tips for staying safe in a workshop:
Always be aware of your surroundings and avoid distractions.Never work alone.Report any hazards to your supervisor.Use the correct personal protective equipment (PPE).Read and follow all operating instructions for each machine.Use the correct machine for the job.Make sure all guards and safety devices are in place and working properly.Do not overload machines.Keep machines clean and free of debris.Inspect tools before each use.Store tools properly.Do not use tools that are damaged or not working properly.By following these safety tips, you can help to prevent accidents and injuries in the workshop.
Fill in the blank to complete the “first_character” function. This function should return the first character of any string passed in. Complete the string operation needed in this function so that input like "Hello, World" will produce the output "H".
Answers
This question it’s complicated
This agency develops standards for pressure vessels and pressure relief valves, as well as the design, welding, and materials that may be used in pipeline construction.
Select one:
a. American Petroleum Institute
b. American Society of Mechanical Engineers
c. American Gas Association
d. National Fire Protection Association
Answers
Answer:
b. American Society of Mechanical Engineers
Explanation:
The "American Society of Mechanical Engineers" (ASME) is an organization that ensures the development of engineering fields. It is an accreditation organization that ensures parties will comply to the ASME Boiler and Pressure Vessel Code or BPVC.
The BPVC is a standard being followed by ASME in order to regulate the different pressure vessels and valves. Such standard prevents boiler explosion incidents.
When a large modern aircraft employs a variable incidence tailplane, trim changes are made by:A) adjusting the trim tab on the trailing edge of the elevator.B) changing the angle of the entire tailplane.C) varying the spring bias trimming system.D) adjusting the Q feel unit.
Answers
When a large modern aircraft employs a variable incidence tailplane, the trim changes are made by adjusting the angle of the entire tailplane.
So, the correct answer is B.
What's the entire tailplane?This type of tailplane is designed to be adjustable in flight, allowing the pilot to change the angle of incidence and thus the lift generated by the tailplane.
This adjustment is made using an actuator or hydraulic system, which moves the entire tailplane up or down. This allows the pilot to adjust the aircraft's pitch attitude without changing the elevator deflection.
This is different from a fixed incidence tailplane, which relies on the trim tab on the trailing edge of the elevator to adjust the aircraft's pitch attitude. The spring bias trimming system and Q feel unit are not directly related to the operation of a variable incidence tailplane.
Learn more about tailplane at
https://brainly.com/question/31452860
#SPJ11
Argue the importance of DNA analysis to the field of forensic science.(IM TIMED PLEASE HURRY!!!!)
Answers
DNA analysis plays a crucial role in forensic science because it provides irrefutable evidence to identify suspects, victims, and even remains. It is a highly reliable method that allows investigators to match DNA samples found at a crime scene to a suspect or exclude innocent individuals from the investigation.
This helps to solve cases faster and more accurately, ensuring that justice is served. DNA analysis is also helpful in exonerating the wrongly accused, which is critical to upholding the integrity of the criminal justice system. Overall, DNA analysis is an essential tool in forensic science that helps to ensure that the right person is held accountable for their actions and the innocent are protected from false accusations.
The importance of DNA analysis to the field of forensic science lies in its ability to provide accurate and reliable evidence for criminal investigations. DNA analysis allows forensic scientists to. Identify suspects: By comparing DNA samples found at a crime scene with those of potential suspects, investigators can establish a match, proving a suspect's presence at the crime scene or involvement in the crime. Exonerate the innocent: DNA analysis can also clear innocent individuals by demonstrating that their DNA does not match the evidence found at the crime scene, preventing wrongful convictions. Solve cold cases: DNA analysis can be used to re-examine unsolved cases, even after many years, providing new leads and potentially identifying the perpetrator.
To know more about investigators visit :
https://brainly.com/question/29365121
#SPJ11
what is the part of a drill that holds the drill bit in place is called the ?
Answers
The part of a drill that holds the drill bit in place is called the chuck.
The chuck is a key component of a drill, as it securely holds the drill bit in place during operation. It is typically located at the end of the drill, and can be opened and closed to insert or remove the drill bit.
The chuck is usually operated by either a key or a lever, depending on the type of drill. It is important to make sure that the chuck is properly tightened when the drill bit is inserted, as this will ensure that the bit is secure and will not slip or come loose during drilling.
Additionally, it is important to make sure that the bit is compatible with the size of the chuck, as an improper fit could cause the bit to become stuck or damaged.
Learn more about The chuck: https://brainly.com/question/17206156
#SPJ4
how are conversions between the rgb and hex used in the field of engineering (or other stem fields)?
Answers
Conversions between RGB and hexadecimal values are commonly used in engineering and other STEM fields to represent colors.
For example, in web design, RGB and hex values are used to specify the color of text and backgrounds. In digital image processing, RGB and hex values are used to describe the color of pixels in an image. In audio engineering, RGB and hex values are used to represent waveform data.
Additionally, conversions between RGB and hex values are used to create color codes for hardware components, such as resistors and LEDs.
Learn more about Conversions between RGB and hexadecimal values:
https://brainly.com/question/13747286
#SPJ4
The air conditioner in a house or a car has a cooler that brings atmospheric air from 30C to 10C, with both states at 101KPa. If the flow rate is 0.75kg/s, find the rate of heat transfer using constant specific heat of 1.004kj/kg.K
Answers
The rate of heat transfer by the air conditioner using constant specific heat of 1.004kj/kg.K is 15.06 kW.
What is the rate of heat transfer?Rate of heat transfer is the power rating of the machine.
Work done and changes in potential and kinetic energy are neglected since it is a steady state process.
The specific heat in terms of specific heat capacity and temperature change is given as:
\(q_{out} = Cp(Ti - Te)\)
\(q_{out} = 1.004(30 - 10) = 20.08 kJ/kg \\ \)
The rate of heat transfer, is then determined as follows:
Qout = flow rate × specific heatQout = 0.75 × 20.08 = 15.06 kW
Therefore, the rate of heat transfer by the air conditioner is 15.06 kW.
Learn more about rate of heat transfer at: https://brainly.com/question/17152804
#SPJ1
Which of the following is true about customer relationship management (CRM)?
A. It eliminates the need to depend on information produced through primary research.
B. Its aim is to directly maximize profit margins.
C. Its aim is to establish cause-effect relationships between marketing strategies and consumption trends.
D. Its aim is to maximize customer loyalty.
Answers
The statement that is true about customer relationship management (CRM) is "Its aim is to maximize customer loyalty."
Option D is the correct option.
CRM stands for customer relationship management.
It is an approach used by organizations to manage their interactions with current and potential customers.
The main aim of CRM is to maximize customer loyalty.
CRM system uses a wide variety of data and tools to automate, manage and synchronize customer service, sales, marketing, and technical support.
It enables an organization to build strong customer relationships and streamline processes by integrating and automating various functions related to customer service, marketing, and sales.
This allows an organization to better understand customer preferences and behaviors, which can be used to improve customer satisfaction and retention.
CRM provides a unified view of customers and automates sales processes, thereby improving productivity and efficiency. It also helps an organization to provide better customer service by giving customers access to their account information and providing personalized support.
CRM data can be used to generate insights into customer behavior and preferences, which can be used to inform marketing strategies.
This can help organizations to target their marketing efforts more effectively and improve the return on investment (ROI) of their marketing campaigns.
To know more about CRM, visit:
https://brainly.com/question/30396413
#SPJ11
Which personal protective equipment (PPE) should you wear when working around asbestos-containing materials?
A) Respiratory protectionB) Protective work clothing, including gloves C) Face shields and/or vented goggles D) All of the above
Answers
Answer:
d
Explanation:
yea
Answer:
D
Explanation:
Discoloration on walls, work surfaces, ceilings, walls, and pipes may indicate a leak that is causing you to waste raw materials.
Answers
Answer:
True :)
Explanation:
If this is a true or false question.
The discoloration is when the color of a particular thing comes off or changes, fading from its original color. In other words, when the original color of anything changes or wanes off, then that is called discoloration. The statement is true.
What is Discoloration?This chemical shift occurs for a number of reasons, including its interaction with other elements nearby or the unfavorable effects of other elements it comes into touch with.
Water leaks may create cases of discoloration on walls, surfaces, even ceilings, and pipes. As a result, the surface progressively changes and becomes moist.
Discoloration puts the surrounding region in danger in addition to altering the part(s) or area's look and durability.
Since a change in that region or component is required, the raw material(s) used are wasted. The claim that discoloration results in the waste of raw materials are thus accurate.
Learn more about discoloration here:
brainly.com/question/6378613
#SPJ6
Give me source code of Simple openGL project. ( without 3D or Animation) simple just.
Answers
Answer:
Use GitHub or stackoverflow for this answer
Explanation:
It helps with programming a lot
1)What are the three previous manufacturing revolutions Mr. Scalabre mentions? When did these take place?
2)Why does Mr. Scalabre believe we are not growing in productivity? How do we turn these shortcomings into the next big manufacturing revolution?
3)How is robotics making an impact in productivity?
4)How has 3D printing made an impact in productivity?
5)What role do you feel engineers and experts in technology will play in this next revolution? What are some other ways they will contribute to increasing productivity?
Answers
The three previous manufacturing revolutions that Mr. Scalabre mentioned and their year of occurrence are:
The steam engine in the mid-19th CenturyThe mass-production model in the early 20th CenturyThe first automation wave in the 1970sWhat is a Manufacturing Revolution?This refers to the process of change from a handicraft economy to industry production-based production.
Hence, we can see that Mr. Scalabre believes we are not growing in productivity because there has not been enough automation to perform the tasks needed.
The effect of robotics is making an impact on productivity because a lot of complex, difficult tasks are done by machines.
3D printing has made an impact on productivity because there is a reduction in the pressing cycle and errors due to negligence are reduced.
The role the engineers have to play in the next revolution is that they would have to produce mathematical model that can be used to produce better AIs
Read more about manufacturing revolutions here:
https://brainly.com/question/14316656
#SPJ1
When a heater is turned on, the fuse wire repeatedly gets burnt even after changing the same fuse wire with the same length and width, the wire keeps getting burnt. Which of the following is advisable?
Answers
First, because a current greater than its capacity is being flowed through, the fuse burns out repeatedly. Now,. I and R have an inverse relationship (current). The fuse wire's length and current rating are independent. Fuse wire is capable of carrying electricity over any distance, but thickness—which regulates melting—is crucial.
Why does fuse wire burn?All of the circuit's current flows through a metal ribbon that is inside the fuse. If too much current flows through the ribbon—which is sized to fit the gauge of the circuit wire—it melts through or "blows," and the circuit is destroyed.(ii) The fuse wire's length and current rating are independent. Fuse wire is capable of carrying electricity over any distance, but thickness—which regulates melting—is crucial.If the current is too high, the element heats up to a greater temperature, melts immediately, or melts a soldered junction inside the fuse, opening the circuit and cutting off the current. Therefore, it is irrelevant how long the fuse wire is.To learn more about Fuse wire refer to:
https://brainly.com/question/15409880
#SPJ1
Suppose you want to buy a new car. The car will be used mainly for going to work, shopping, running errands, and visiting friends.
What are your objectives to buy this new car? (Mention two or more).
Answers
2. So it’s easier for you to do leisure activities. (I.e visiting friends, shopping)
ASSIGNMENT
Prepare an integrated logistics support (ILS) management solution/plan for the management of the logistics process cycle your organisation. If you are not employed, or do not have access to an organisation, design an integrated logistics support (ILS) management solution/plan for the SAA Technical division.
(HINT: For this POE you need to consider the operational and the engineering logistics components as well as their interaction, AND integrative nature)
Answers
Develop an integrated logistics support (ILS) plan for the SAA Technical division, considering operational and engineering logistics components and their interaction.
Designing an integrated logistics support (ILS) management solution/plan involves considering the operational and engineering logistics components, as well as their interaction and integrative nature. Here's a step-by-step explanation of how to develop an ILS management solution/plan for the SAA Technical division:
Step 1: Assess Operational Logistics:
- Identify the specific operational logistics requirements of the SAA Technical division, such as inventory management, transportation, warehousing, and distribution.
- Analyze current processes and systems to identify areas for improvement and optimization.
- Determine key performance indicators (KPIs) to measure the effectiveness and efficiency of operational logistics.
Step 2: Evaluate Engineering Logistics:
- Evaluate the engineering logistics aspects of the SAA Technical division, including maintenance and repair processes, spare parts management, and technical documentation.
- Identify opportunities to streamline maintenance and repair procedures, reduce downtime, and improve equipment reliability.
- Ensure proper documentation and record-keeping for maintenance activities and equipment history.
Step 3: Identify Interaction Points:
- Determine the interaction points between operational and engineering logistics to ensure seamless coordination and collaboration.
- Establish effective communication channels and information-sharing mechanisms between operational and engineering teams.
- Develop cross-functional teams to address logistics challenges and optimize the overall logistics process cycle.
Step 4: Develop Integration Strategies:
- Design strategies to integrate operational and engineering logistics seamlessly.
- Implement a centralized information management system to facilitate real-time tracking of inventory, equipment status, and maintenance activities.
- Establish clear workflows and procedures for coordinating operational and engineering logistics activities.
Step 5: Implement and Monitor:
- Implement the ILS management solution/plan gradually, ensuring proper training and change management processes.
- Monitor the performance of the integrated logistics support system using defined KPIs.
- Continuously evaluate and refine the ILS management solution/plan based on feedback, emerging technologies, and industry best practices.
By following these steps, an integrated logistics support (ILS) management solution/plan can be developed for the SAA Technical division, ensuring efficient coordination between operational and engineering logistics, optimizing processes, and improving overall logistics performance.
To learn more about logistics process click here: brainly.com/question/28502994
#SPJ11
1. An air standard cycle is executed within a closed piston-cylinder system and consists of three processes as follows:1-2 = constant heat addition from 100 kPa and 27∘C to 700 kPa 2-3 Isothermal expansion until V3 = 7v23-1 P = constant heat rejection to the initial state2. Assume air has constant properties with cv = 0.718 kJ/kg K, cp = 1.005 kJ/kg K, R = 0.287 kJ/kg K, and k = 1.4.(a) Sketch the P- and T-s diagrams for the cycle.(b) Determine the ratio of the compression work to the expansion work (the back work ratio).(c) Determine the cycle thermal efficiency.
Answers
Answer:
Explanation: Here it is: 67 Hope that helps! :)
Which statement best explains why pneumatic cylinders need to be smaller than hydraulic cylinders?
The pneumatic system only needs enough room to have an onloff switch installed in order to operate correctly.
The energy in pneumatic power systems is easily transmitted to gases, which absorb the energy of the system and lower its efficiency
The control of the hydraulic system is much more precise and therefore requires a larger cylinder.
The fluid in a hydraulic system has more mass and therefore needs more storage space.
Answers
Answer:
The energy in pneumatic power systems is easily transmitted to gases, which absorb the energy of the system and lower its efficiency.
Explanation:
I did it on edge and got it right.
Answer:
The energy in pneumatic power systems is easily transmitted to gases, which absorb the energy of the system and lower its efficiency
Thanks for points!!! :D
.Which of the following is not a calculation that can be completed with the SUBTOTAL function?
A) Average
B) Count
C) Min
D) Index
Answers
D) Index. The SUBTOTAL function in Excel can perform calculations such as Average (A), Count (B), and Min (C), but it cannot perform the Index function (D). The Index function is used for a different purpose, such as retrieving a value from a specified location within an array or range.
The SUBTOTAL function is a very useful tool in Excel that allows users to perform calculations on a range of data while ignoring certain hidden or filtered values. The function can perform various calculations, such as sum, average, count, max, min, etc. However, the one calculation that cannot be completed with the SUBTOTAL function is the Index function.The Index function in Excel is used to return a value or reference of the cell at the intersection of a particular row and column in a given range. It is not a calculation function like the others mentioned above. Therefore, it cannot be used with the SUBTOTAL function to perform any kind of calculation.To summarize, the SUBTOTAL function is very useful for performing various calculations on a range of data in Excel. However, it cannot be used to perform an Index calculation.
To know more about function visit:
brainly.com/question/31228528
#SPJ11
emitter, base, and collector are the terminals of a?
Answers
Technician A says that a body-over-frame vehicle may have front upper rails.
Technician B says that a body-over-frame vehicle usually has the body welded to the frame.
Who is right?
A)
A only
B)
B only
C)
Both A and B
D) Neither A nor B
Answers
Control points are areas of the vehicle structure that are used to monitor the precision of the vehicle body's dimensions as they are being assembled. Thus, option B is correct.
What frame vehicle usually has the body welded?In a full frame car, the body is independent of the frame and fastened by bushings and bolts. The unibody is a structure made up of integrated panels that are welded, bonded, and riveted together.
Therefore, In a full frame car, the body is independent of the frame and fastened by bushings and bolts. The unibody is a structure made up of integrated panels that are welded, bonded, and riveted together.
Learn more about welded here:
https://brainly.com/question/18667026
#SPJ1
what is the transfer function? what is the steady-state error, ess? what is the natural frequency? you can assume ra
Answers
The transfer function is a mathematical representation of the relationship between the input and the output of a system. The steady-state error, or ess, is the difference between the desired output and the actual output when the system reaches a steady state. The natural frequency is the frequency of the system's response without any external forces.
Transfer Function: Transfer Function is used in signal processing, control engineering, and other disciplines that deal with systems or signals. The ratio of output to input in Laplace transform is known as the transfer function.
Steady-State Error: The error that happens when the system is at a stable state is referred to as a steady-state error. The difference between the desired and actual response is known as steady-state error. A system's ability to track a specific input as time progresses is characterized by this kind of error. If the input signal is a unit step, then the steady-state error is referred to as the static error coefficient. The coefficient of the steady-state error is frequently used to classify systems in control engineering.
Natural Frequency: Natural frequency is a term used in physics to describe how quickly an object vibrates when it is set in motion. The number of oscillations made by a system in a given time period without any external force acting on it is referred to as its natural frequency. A natural frequency is a measure of a system's stiffness and mass. In a control system, it is the frequency at which the system oscillates in the absence of any input.
A natural frequency is also known as an undamped natural frequency or a resonance frequency, and it is represented by the symbol \(\omega_n\).You can assume the following in the problem. If you have any specific values, kindly provide them.
Learn more about Transfer Function here:
https://brainly.com/question/24241688
#SPJ11
Multiply. Write the answer in simplest form. 1 3/10×1/8
Answers
9514 1404 393
Answer:
13/80
Explanation:
The product is ...
(1 3/10)×(1/8) = (13/10)×(1/8) = (13×1)/(10×8) = 13/80