A species A diffuses radially outwards from a sphere of radius ro. The following assumptions can be made. The mole fraction of species A at the surface of the sphere is Xao. Species A undergoes equimolar counter-diffusion with another species B. The diffusivity of A in B is denoted DAB. The total molar concentration of the system is c. The mole fraction of A at a radial distance of 10ro from the centre of the sphere is effectively zero. (a) Determine an expression for the molar flux of A at the surface of the sphere under these circumstances. Likewise determine an expression for the molar flow rate of A at the surface of the sphere. [12 marks] (b) Would one expect to see a large change in the molar flux of A if the distance at which the mole fraction had been considered to be effectively zero were located at 100ro from the centre of the sphere instead of 10ro from the centre? Explain your reasoning. [4 marks] (c) The situation described in (b) corresponds to a roughly tenfold increase in the length of the diffusion path. If one were to consider the case of 1-dimensional diffusion across a film rather than the case of radial diffusion from a sphere, how would a tenfold increase in the length of the diffusion path impact on the molar flux obtained in the 1-dimensional system? Hence comment on the differences between spherical radial diffusion and 1-dimensional diffusion in terms of the relative change in molar flux produced by a tenfold increase in the diffusion path. [4 marks]
Answers
(a) Molar flux of A at the surface of the sphere:We know that the Fick's law is given by :J = -DAB∇ca = -DABdca/drNow, to determine the molar flux at the surface of the sphere, i.e at r = ro. Integrate the above equation by taking dr = (ro - r) , and limits are from r = ro to r = 0.
Substituting the above values in the equation , we get :J = DAB(cao / L)Molar flow rate of A at the surface of the sphere:To determine the molar flow rate at the surface of the sphere, we use the relation as : F = A * Jwhere A = 4πr² , r = ro.
Substituting the given values, we get:F = 4πro² * DAB (cao/L)Thus, the expression for molar flux of A at the surface of the sphere under these circumstances is given by J = DAB (cao/L) and the expression for the molar flow rate of A at the surface of the sphere is given by F = 4πro² * DAB (cao/L).(b) No, we would not expect to see a large change in the molar flux of A if the distance at which the mole fraction had been considered to be effectively zero were located at 100ro from the centre of the sphere instead of 10ro from the centre.
The reason being that the change in the flux of A is proportional to the gradient of the mole fraction of A with respect to the radial distance. As the mole fraction is very small, its gradient is also very small. Hence, the change in the flux of A due to the change in the radial distance is very small.
(c) If one were to consider the case of 1-dimensional diffusion across a film rather than the case of radial diffusion from a sphere, a tenfold increase in the length of the diffusion path would result in a decrease in the molar flux obtained in the 1-dimensional system.
This is because the flux of A across the film is proportional to the gradient of the mole fraction of A with respect to the distance across the film. As the distance is increased, the gradient decreases, resulting in a decrease in the flux. In terms of the relative change in molar flux produced by a tenfold increase in the diffusion path, we can say that the change in molar flux in 1-dimensional diffusion is greater than that in spherical radial diffusion.
To know more about surface visit:
https://brainly.com/question/32235761
#SPJ11
Related Questions
describe an engineering advance that has led to greater knowledge about the solar system
Answers
Answer:
Space Rovers
Explanation:
The engineering advancement of the invention space rovers has changed space exploration tremendously. The first space rover ever to go out onto another planet was made by NASA and put on mars to learn more about the red planet and see if there where any plausible signs of past or maybe even present life. This mission was incredibly successful and for the first time in space exploration history, there was a spacecraft that you could move around that could with do the conditions of the planet for weeks, months, sometimes years at a time, moving around taking pictures and constantly collecting data. This was revolutionary for scientists, this way they could get copious amounts of information just on rover and not having to send multiple crafts only to die in the first few hours but sending back a relative amount of information. With rovers you can have them collect samples and bring the back to earth, not something that could’ve been done without a human, until rovers. They have completely changed and improved collecting data from other planets and have been one of the most revolutionary inventions when it comes to space exploration.
This is what I put for the answer, hope it helps in some way.
In the case, the software engineers present at the meeting would concern themselves with ________-level strategy
Answers
In the case, the software engineers present at the meeting would concern themselves with functional level strategy.
Software engineers create and construct computer systems and applications to solve problems in the real world. Software engineers usually referred to as software developers, create software for computers and apps.
Functional-level strategies are the tasks and goals assigned to various divisions to support your corporate strategy and business plan. These strategies outline the results you hope to obtain from the regular operations of particular divisions (or functions) of your company.
Things like prompt delivery of commodities, high-quality procedures and products, and process efficiency are examples of functional-level marketing techniques.
Therefore, in the case, the software engineers present at the meeting would concern themselves with functional level strategy.
To learn more about software engineers visit:
brainly.com/question/10339061
#SPJ12
What is the importance of food handling machines in food industry (Explain in points).
Answers
Answer:
Explanation:
Profile photo for Rosie Milojevic
Rosie Milojevic, Business Development at iComplied
Answered 3 years ago
For those who run or work in a business that handles food, you understand the importance of food safety and regulation compliance as it pertains to not only to certification and licensing of a company, but also the life or death of those who consume the products. Because food safety is such an important issue, we want to ensure that all companies who work in the production, preparation, or processing of food have the tools and information they need to ensure they are in full compliance 100% of the time. One slip in food safety compliance could cost someone their health or life, and this information spreads mistrust in the general public toward the company who sold the product, and also the entire product across companies throughout an entire country and beyond. So how does each company working with food ensure they comply with each and every food safety regulation? Through excellent auditing tools.
Auditing in Food Safety Must Change
Auditing in food safety compliance is essential in ensuring that all regulations are being complied with. Most auditing practices for major companies are severely out of date. Many rely on several different forms, stacks of paperwork, and data stored on multiple different computers and databases. This is incredibly inefficient, as it can be easy to miss something when comparing one sheet to the next, and paper can easily be lost or destroyed. It is also time consuming for companies to share audits over separate computers and databases, as it must be passed down from one employee to the next. Technology has granted all food safety compliance managers a simple solution. Auditing apps are the new wave solutions for companies who want all of their data stored on one cloud database that is instantly accessible with real-time data for all employees. This means that no one ever gets left out of the loop, and no new information will fall through the cracks.
A front wheel drive vehicle with four wheel disc brakes is pulling to the left. Tech A says an external kink or internal restriction in the LF brake line will result in this condition. Tech B says to use a compression fitting to repair a section of brake line. Who is correct? Tech A Tech A Tech B Tech B Both Both Neither
Answers
Answer:
Tech A is correct.
Explanation:
A front-wheel-drive pulling to the left can result from several factors. One of them is definitely a faulty break.
A correct diagnosis linking the problem to the brakes is when there is an internal restriction and the pull is constant to one side and gets worse when the brakes are applied.
To confirm this, one would need to lift the vehicle and rotate each wheel by hand to check for excessive friction.
So the restriction may be caused by:
brake calipers that are sticky to the drumtoo much brake fluid in the brake master cylinder - this prevents the caliper pistons from retracting when the brakes are released misadjusted drum brakes and or parking brakes.Cheers
describe potential errors due to trim heel and transducer separations in ships
Answers
Answer:
Trim heel and transducer separations are two potential errors that can affect the accuracy of a ship's draft and trim readings.
Trim heel refers to the angle of inclination of a ship in the water, which can affect the readings taken by the ship's sensors. If the ship is not perfectly level in the water, the sensors may not provide accurate measurements of the draft or the amount of cargo on board. This can result in incorrect calculations of the ship's stability, which can lead to dangerous situations.
Transducer separation is another potential source of error that can affect the accuracy of a ship's draft readings. Transducers are sensors that are mounted on the hull of a ship to measure the water level and provide information on the ship's draft. If these sensors are not properly calibrated or if they are separated from the hull, they may provide inaccurate readings, which can lead to errors in the ship's stability calculations.
In summary, trim heel and transducer separations can result in inaccurate readings of a ship's draft and cargo load, which can affect the ship's stability and safety. It is important for ship operators to regularly calibrate and maintain their sensors to minimize the risk of errors due to trim heel and transducer separations.
Hope this helps!
.Write a program that uses a void function void miles_to_km() to generate a kilometer
conversion table for all even kilometers from 2 miles to 62 miles. Use two decimal
places for kilometers.
Answers
Explanation:
rational
Step-by-step explanation:
The discriminant (d) of a quadratic equation ax^2 + bx + c = 0ax
2
+bx+c=0 is:
\boxed{\mathrm{d =} \ b^2 - 4ac}
d= b
2
−4ac
.
If:
• d > 0, then there are two real solutions
• d = 0, then there is a repeated real solution
• d < 0, then there is no real solution.
In this question, we are given the quadratic equation 3x^2 + 4x - 2 = 03x
2
+4x−2=0 . Therefore, the discriminant of the equation is:
b² - 4ac = (4)² - 4(3)(-2)
= 16 - (-24)rational
Step-by-step explanation:
The discriminant (d) of a quadratic equation ax^2 + bx + c = 0ax
2
+bx+c=0 is:
\boxed{\mathrm{d =} \ b^2 - 4ac}
d= b
2
−4ac
.
If:
• d > 0, then there are two real solutions
• d = 0, then there is a repeated real solution
• d < 0, then there is no real solution.
In this question, we are given the quadratic equation 3x^2 + 4x - 2 = 03x
2
+4x−2=0 . Therefore, the discriminant of the equation is:
b² - 4ac = (4)² - 4(3)(-2)
= 16 - (-24)
= 40
Since the discriminant, 40, is greater than zero, the quadratic equation has 2 rational solutions.
= 40
Since the discriminant, 40, is greater than zero, the quadratic equation has 2 rational solutions.
A shunt DC motor rated at 230 V, with armature resistance of 0.05 22 and field resistance of 75 12, consumes 7 A when no-load at 1120 rpm. The current consumed by the motor at another given load is 46 A. Find (a) motor speed a the given load, (b) rotational and core losses, and (c) efficiency.
Answers
Answer:
Brainlist me if it helps!
Explanation:
To find the motor speed at the given load, we need to use the following equation:
speed (rpm) = (V - Ia * Ra) / (k * Ea)
where V is the applied voltage, Ia is the armature current, Ra is the armature resistance, k is the motor's torque constant, and Ea is the back EMF.
At no-load, the back EMF is equal to the applied voltage, so we can rearrange the equation to solve for Ea:
Ea = V - Ia * Ra
Substituting the given values, we find that Ea = 230 V - 7 A * 0.05 22 = 229.75 V.
Now we can use the equation to solve for the motor speed at the given load:
speed (rpm) = (230 V - 46 A * 0.05 22) / (k * 229.75 V)
We don't know the value of k, so we'll need to solve for it first. We can use the following equation:
k = (Ea2 - Ea1) / (Ia2 - Ia1)
where Ea2 and Ia2 are the back EMF and armature current at the given load, and Ea1 and Ia1 are the back EMF and armature current at no-load.
Substituting the given values, we find that k = (229.75 V - 0 V) / (46 A - 7 A) = 4.95 V/A.
Substituting this value into the equation for speed, we find that the motor speed at the given load is:
speed (rpm) = (230 V - 46 A * 0.05 22) / (4.95 V/A * 229.75 V) = 890 rpm
(a) The motor speed at the given load is 890 rpm.
(b) The rotational losses are equal to the power consumed by the motor at no-load, which is equal to the product of the applied voltage and the armature current. Substituting the given values, we find that the rotational losses are equal to 230 V * 7 A = 1610 W.
The core losses are equal to the power consumed by the motor at the given load, minus the rotational losses. Substituting the given values, we find that the core losses are equal to 46 A * 230 V - 1610 W = 4140 W - 1610 W = 2530 W.
(c) The efficiency is equal to the output power, divided by the input power. The output power is equal to the power consumed by the motor at the given load, which is equal to 46 A * 230 V = 10,380 W. The input power is equal to the power consumed by the motor at no-load, plus the core losses, which is equal to 1610 W + 2530 W = 4130 W.
Therefore, the efficiency is equal to 10,380 W / 4130 W = 2.51.
The cost of hiring new employees outpaces the raises for established employees is
A.
Salary compression
B.
Occupational based pay
C.
Merit pay
D.
Need for Achievement
Answers
Answer:
do you have to make the right decisions to be a person who has been a member who is not the first time a great person who has a job in a day of his life or
Which of the following would be useful to the building of a skyscraper? (Select all that apply.)
steep grading
deep foundation
wide footing
large footprint
Answers
Answer:
steep grading
Explanation:
the farthest
why Vigenere Cipher is not acceptable as an algorithm in today’s computing environment?
Answers
The Vigenere Cipher is not considered acceptable as a secure algorithm in today's computing environment for the following reasons: . Lack of perfect secrecy, frequency analysis, etc.
1. Vulnerability to frequency analysis: The Vigenere Cipher is based on the concept of using a keyword to encrypt the plaintext. However, the repeated use of the keyword in the encryption process introduces patterns in the ciphertext. This makes it susceptible to frequency analysis, where an attacker can analyze the frequency distribution of letters in the ciphertext to deduce information about the plaintext.
2. Lack of perfect secrecy: The Vigenere Cipher does not provide perfect secrecy, meaning that even with a sufficiently long and random keyword, there is still a possibility of breaking the encryption and recovering the plaintext. With advancements in computational power and cryptographic analysis techniques, the Vigenere Cipher can be easily broken with modern computing resources.
3. Key management challenges: The Vigenere Cipher requires the secure distribution and management of a long and random keyword. In practical scenarios, securely exchanging and managing such keys can be challenging. Additionally, if the keyword is compromised, the security of the encrypted messages is compromised as well.
4. Limited key space: The key space of the Vigenere Cipher is limited by the length of the keyword. Since the keyword is repeated cyclically, the effective key length is the length of the keyword. This makes the Vigenere Cipher susceptible to brute-force attacks, where an attacker can try all possible keyword combinations to decrypt the ciphertext.
Due to these limitations, the Vigenere Cipher is no longer considered secure for modern computing environments. Instead, modern encryption algorithms such as AES (Advanced Encryption Standard) and RSA (Rivest-Shamir-Adleman) are preferred, which provide stronger security guarantees and have undergone extensive scrutiny and analysis by the cryptographic community.
To Know more about AES (Advanced Encryption Standard), click here:
https://brainly.com/question/31925688
#SPJ11
How to increase air traffic control revenues in air transportation
Answers
The ways to increase air traffic control revenues in air transportation are given below in explanation part.
Several ways might be taken into consideration to raise air traffic control revenues:
Infrastructure Modernization and Expansion: By improving capacity and efficiency, air traffic control systems and infrastructure can handle more passengers and provide better services.
Implement performance-based navigation (PBN): PBN is a navigational concept that enables aeroplanes to use satellite-based systems to fly more direct routes.
Offer Value-Added Services: In addition to standard control and surveillance duties, air traffic control authority can provide value-added services.
Thus, it is vital to remember that efficient air traffic management, safety, and security should constantly be balanced with revenue generating.
For more details regarding traffic control, visit:
https://brainly.com/question/10480226
#SPJ4
You are trying to decide between two new stereo amplifiers. One is rated at 75 W per channel and the other is rated at 120 W per channel. In terms of dB, how much louder will the more powerful amplifier be when both are producing sound at their maximum levels
Answers
Answer:
It would depend if you're combining channels or not. Assuming your' only using 1 channel per amp then the 120 W amp will be 45 W more powerful. this also assumes that the Ohm rating on the amps is the same. In terms of percentage increase, it would be a 60% increase in power.
Explanation:
Based on the ratings on both channels and the sound they can produce when at maximum, the difference will be 2.04 dB.
How to express current in DBDecibel = 10 x Log (Stereo current / Threshold of hearing)
Solving for the difference.= (10 x Log (120 / Threshold of hearing)) - (10 x Log (75/ Threshold of hearing))
= 10 x Log ( (120/ Threshold) x (Threshold / 75)
= 10 x Log (120 / 75)
= 2.04 dB
In conclusion, the more powerful amplifier will be 2.04 dB louder.
Find out more on calculating decibels at https://brainly.com/question/9367064.
Question 5
1 pts
Lumber which has been put through a planer is known as surfaced or
]
Answers
Answer:
what does that mean welp I have no idea sorry for answering
Consider this example of a recurrence relation. A police officer needs to patrol a gated community. He would like to enter the gate, cruise all the streets exactly once, and then leave by the same gate. What information would you need to determine a Euler circuit and a Hamilton circuit
Answers
Answer:
the police officer cruise each streets precisely once and he enters and exit with the same gate.
Explanation:
NB: kindly check below for the attached picture.
The term ''Euler circuit'' can simply be defined as the graph that shows the edge of K once in a finite way by starting and putting a stop to it at the same vertex.
The term "Hamiltonian Circuit" is also known as the Hamiltonian cycle which is all about a one time visit to the vertex.
Here in this question, the door is the vertex and the road is the edge.
The information needed to detemine a Euler circuit and a Hamilton circuit is;
"the police officer cruise each streets precisely once and he enters and exit with the same gate."
Check attachment for each type of circuit and the differences.
the police officer cruise each streets precisely once and he enters and exit with the same gate.
Technician A says you should place the air ratchet setting to
clockwise to loosen a fastener. Technician B says a fastener
must be set to the proper torque after using an air ratchet. Who
is correct?
Answers
Which company produces comprehensive patch management software?
Quest
Motorola
Apple
Sony
Answers
Which of the following policy actions could the federal reserve use to combat inflation
Answers
\( \huge{ \underbrace{ \overbrace{OPTIONS}}}\)
\( \huge{ \underbrace{ \overbrace{PlEASE}}}\)
10. What refrigerant is no longer manufactured in the
United States?
Answers
Answer:
Freon Refrigerant
Explanation:
As of January 1, 2020 Freon Refrigerant can no longer be manufactured or imported to the United States. This is because R-22 (the principal component in Freon) has been banned in the states. Along with other greenhouse gasses, due to their contribution to damaging Earth’s ozone layer and global warming.
hope this helps:)
Answer:
Freon Refrigerant Is Now Banned in the US
As of January 1, 2020, a once very popular air conditioning refrigerant can no longer be made in or imported into the United States.
Please give me brainliest - you get 25% as well! I swear!
in a work situation where an electrician’s hands get wet while operating a 120-volt, corded drill, which of the following would be true?
Answers
The following liquids are stored in a storage vessel at 1 atm and 25°C. The vessels are vented with air. Determine whether the equilibrium vapor above the liquid will be flammable. The liquids are:________.
a. Acetone
b. Benzene
c. Cyclohexane
d. Toluene Problem
Answers
Answer:
The liquids are TOLUENE because the equilibrum vapor above it will be flammable ( D )
Explanation:
Liquids stored at : 1 atm , 25⁰c and they are vented with air
Determining whether the equilibrum vapor above the liquid will be flammable
We can determine this by using Antoine equation to calculate saturation vapor pressure also apply Dalton's law to determine the volume % concentration of air and finally we compare answer to flammable limits to determine which liquid will be flammable
A) For acetone
using the Antoine equation to calculate saturation vapor pressure
\(In(P^{out} ) = A - \frac{B}{C + T}\)
values gotten appendix E ( chemical process safety (3rd edition) )
A = 16.6513
B = 2940.46
C = -35.93
T = 298 k input values into Antoine equation
therefore ; \(p^{out}\) = 228.4 mg
calculate volume percentage using Dalton's law
= V% = (saturation vapor pressure / pressure ) *100
= (228.4 mmHg / 760 mmHg) * 100 = 30.1%
The liquid is not flammable because its UFL = 12.8%
B) For Benzene
using the Antoine equation to calculate saturation vapor pressure
\(In(P^{out} ) = A - \frac{B}{C + T}\)
values gotten appendix E ( chemical process safety (3rd edition) )
A= 15.9008
B = 2788.52
C = -52.36
T = 298 k input values into the above equation
\(p^{out}\) = 94.5 mmHg
calculate volume percentage using Dalton's law
V% = (saturation vapor pressure / pressure ) *100
= (94.5 / 760 ) * 100 = 12.4%
Benzene is not flammable under the given conditions because its UFL =7.1%
C) For cyclohexane
using the Antoine equation to calculate saturation vapor pressure
\(In(P^{out} ) = A - \frac{B}{C + T}\)
values gotten appendix E ( chemical process safety (3rd edition) )
A = 15.7527
B = 2766.63
c = -50.50
T = 298 k
solving the above equation using the given values
\(p^{out}\) = 96.9 mmHg
calculate volume percentage using Dalton's law
V% = (saturation vapor pressure / pressure ) *100
= ( 96.9 mmHg /760 mmHg) * 100 = 12.7%
cyclohexane not flammable under the given conditions because its UFL= 8%
D) For Toluene
using the Antoine equation to calculate saturation vapor pressure
\(In(P^{out} ) = A - \frac{B}{C + T}\)
values gotten from appendix E ( chemical process safety (3rd edition) )
A = 16.0137
B = 3096.52
C = -53.67
T = 298 k
solving the above equation using the given values
\(p^{out}\) = 28.2 mmHg
calculate volume percentage using Dalton's law
V% = (saturation vapor pressure / pressure ) *100
= (28.2 mmHg / 760 mmHg) * 100 = 3.7%
Toluene is flammable under the given conditions because its UFL= 7.1%
Calculate the number of vacancies per cubic meter for some metal, M, at 783°C. The energy for vacancy formation is 0.95 eV/atom, while the density and atomic weight for this metal are 6.10 g/cm^3 (at 783°C) and 43.41 g/mol, respectively.
Answers
Answer:
Following are the solution to this question:
Explanation:
The number of vacancies by the cubic meter is determined.
\(N_V =N exp(\frac{Q_v}{kT})\)
\(= \frac{N_A \rho}{A} exp (\frac{Q_v}{kT})\)
\(= \frac{6.022 \times 10^{23} \times 6.10}{43.41} \exp(\frac{-0.95}{8.62\times 10^{-5} \times (783+273)})\\\\= \frac{36.7342 \times 10^{23}}{43.41} \exp(\frac{-0.95}{0.0313626})\\\\= 0.846215158 \times 10^{23} \exp(-30.290856)\\\\\)
\(=1.57 \times 10^{25} \ cm^{-3}\)
What is the basic requirement of measurements?
Answers
The basic requirement of measurements is to have a standard or reference point against which to compare the quantity being measured. This standard or reference point should be well-defined and stable, and the measurement process should be repeatable and consistent. Additionally, it is important to ensure that the measurement equipment is calibrated and in good working condition.
Answer:
The most basic requirement for measurements is the presence of a standard or reference point against which the quantity being measured can be compared. The measurement process should be repeatable and consistent, and the standard or reference point should be well-defined and stable. Furthermore, ensure that the measurement equipment is calibrated and in good working order.
Explanation:
Determine the upper limit of the alternating shear stress, for infinite fatigue life (i.e. modified fatigue shear strength)= ___ MPa
Answers
For infinite fatigue life, the alternating shear stress maximum is equal to 0.5 MPa.
What causes the most shear stress?The maximum shear stress is the amount of shear force that can be focused in a relatively compact space. Any structural part that experiences shear force from an external force acting in a direction that is opposed to and out of alignment with internal forces
What is the stress equation?The units would predict that stress is calculated by dividing the force by the area where it was generated, and since this area ("A") can be either axial or sectional, the fundamental stress equation is " = F/A."
To know more about stress visit:-
https://brainly.com/question/25632718
#SPJ4
how can I skip more helppppppppppppppppppppppp
Answers
Answer: skip what
Explanation:
Answer:
answer someone else's question and you will never have to skip again
Explanation:
A square plate of titanium is 12cm along the top, 12cm on the right side, and 5mm thick. A normal tensile force of 15kN is applied to the top side of the plate. A normal tensile force of 20kN is applied to the right side of the plate. The elastic modulus, E, is 115 GPa for titanium.If the left and bottom edges of the plate are fixed, calculate the normal strain and elongation of both the TOP and RIGHT side of the plate.
Answers
Answer:
\(X_t=2.17391304*10^{-4}\)
\(X_r=2.89855072*10^{-4}\)
\(e_t=0.0026\)
\(e_r=0.0035\)
Explanation:
From the question we are told that:
Dimension \(12*12\)
Thickness \(l_t=5mm=5*10^-3\)
Normal tensile force on top side \(F_t= 15kN\)
Normal tensile force on right side \(F_r= 20kN\)
Elastic modulus, \(E=115Gpap=>115*10^9\)
Generally the equation for Normal Strain X is mathematically given by
\(X=\frac{Force}{Area*E}\)
Therefore
For Top
\(X_t=\frac{Force_t}{Area*E}\)
Where
\(Area=L*B*T\)
\(Area=12*10^{-2}*5*10^{-3}\)
\(Area=6*10^{-4}\)
\(X_t=\frac{15*10^3}{6*10^{-4}*115*10^9}\)
\(X_t=2.17391304*10^{-4}\)
For Right side\(X_r=\frac{Force_r}{Area*E}\)
Where
Area=L*B*T
\(Area=12*10^{-2}*5*10^{-3}\)
\(Area=6*10^{-4}\)
\(X_r=2.89855072*10^{-4}\)
\(X_r=2.89855072*10^{-4}\)
Generally the equation for elongation is mathematically given by
\(e=strain *12\)
For top
\(e_t=2.17391304*10^{-4}*12\)
\(e_t=0.0026\)
For Right
\(e_r=2.89855072*10^{-4} *12\)
\(e_r=0.0035\)
What strategy may help a visual learner process data?
Answers
A strategy that may help a visual learner process data is a pie chart or histogram.
Which technical practice incorporates build-time identification of security vulnerabilities in the code?
Answers
Technical practice incorporates build-time identification of security vulnerabilities in the code is Penetration testing.
What is Penetrating Testing?A penetration test, sometimes referred to as a pen test or ethical hacking, is a legitimate simulated cyberattack on a computer system that is carried out to analyze the system's security. This is distinct from a vulnerability assessment.
In order to identify and illustrate the financial effects of a system's vulnerabilities, penetration testers employ the same tools, strategies, and procedures as attackers. Reconnaissance, scanning, vulnerability assessment, exploitation, and reporting are the five stages of a penetration test.
Penetration testing is a technical activity that includes build-time discovery of security vulnerabilities in the code.
Penetration tests are essential to an organization's security because they teach staff members how to respond to any kind of intrusion from a malicious party. Pen tests are a method of determining whether a company's security procedures are actually effective.
To learn more about Penetrating Testing, refer to:
https://brainly.com/question/26555003
#SPJ4
For proper function hydraulics systems need a reservoir of which of the following?
A.) Compressible fluid
B.) Non-compressible fluid C.) Non-compressible air
Answers
Think of brake fluid on a vehicle, compressed as one applies the break= pressure to expand brake cylinders in the wheels which compress the pads on the wheel brake rotors.
Release brake and fluid relaxes back into the reservoir/accumulator.
Using the assumptions given in Example 16-1, the rule-of-thumb values for growth constants in the example, and the further assumption that the influent BODS was reduced by 32% in the primary tank, estimate the liquid volume of a com- pletely mixed activated sludge aeration tank for Perryville. The design flow rate is 34,560 mºld and the design influent BODs is 188 mg/L. Assume an ML VSS of 2,000 mg/L.
Answers
The liquid volume of the activated sludge aeration tank for Perryville without additional information and calculations based on the specific design parameters and wastewater characteristics.
How we can using the rule-of-thumb values for growth constants?Without knowing the assumptions or data provided in Example 16-1, it is not possible to accurately estimate the liquid volume of the completely mixed activated sludge aeration tank for Perryville.
In general, the design of a wastewater treatment plant involves a complex set of calculations and considerations, taking into account the specific characteristics of the influent wastewater, the desired effluent quality, the type and size of treatment units, and other factors.
The design of the activated sludge process, in particular, requires knowledge of parameters such as the sludge age, hydraulic retention time, and mixed liquor suspended solids concentration, which can affect the performance and sizing of the aeration tank.
Given the design flow rate of 34,560 m³/d and the influent BOD of 188 mg/L, one approach would be to estimate the required volume of the aeration tank based on the hydraulic retention time (HRT) and the mixed liquor suspended solids (MLSS) concentration.
Assuming an MLVSS of 2,000 mg/L, a typical MLSS concentration for activated sludge systems, and a desired HRT of 8-12 hours, the required volume of the aeration tank would be between 2,743 and 4,115 m³.
However, this is a rough estimate and actual design calculations would require more detailed information and analysis of the wastewater characteristics and treatment process.
Learn more about Perryville
brainly.com/question/3636715
#SPJ11
The introduction of this material into the nineteenth-century industrial age forever changed architectural style and scale. Group of answer choices mortar steel hexagonal plates precast concrete
Answers
The introduction of steel into the nineteenth-century industrial age changed the architectural style and scale forever.
What is steel?Steel can be defined as hard, strong, tough grey (bluish-grey) alloy of iron and carbon that is typically used as a structural and fabricating material in Civil engineering and architecture.
During the industrial age of the nineteenth-century, the introduction of steel changed the architectural style and scale forever.
Read more on steel here: https://brainly.com/question/1836801
#SPJ1