1. Which of the following structures is nod consistent with rules for drawing Lewis structures? (AIl nonbonding lome pairs of electrons and atoms are drawn ar intended.)
In the following Brønsted-Lo
Answers
To represent nitrous acid (HNO2) using its Lewis structure, we can follow certain rules:
1. Determine the total number of valence electrons in the molecule. Nitrous acid consists of one hydrogen atom (H), one nitrogen atom (N), and two oxygen atoms (O). The total number of valence electrons is calculated as follows: 5 (N) + 2(6) (O) + 1 (H) = 14.
2. Connect the atoms with single bonds.
3. Arrange the remaining electrons in pairs around the atoms to satisfy the octet rule (or the duet rule for hydrogen). In this case, we need to place the remaining 12 electrons in six pairs around the three atoms: N, H, and O.
4. Count the number of electrons used in bonding and subtract it from the total number of valence electrons to determine the number of non-bonding electrons or lone pairs.
5. Check the formal charge of each atom. In the Lewis structure of nitrous acid, the formal charges are: N = 0, O1 = -1, O2 = 0, and H = +1.
To know more about electrons visit:
https://brainly.com/question/15885173
#SPJ11
Related Questions
How much faster does hydrogen escape through a porous container than sulphurdioxide
Answers
Hydrogen can be expected to escape significantly faster rate than sulfur dioxide through a porous container due to its smaller molecular size.
The rate at which a gas escapes through a porous container depends on several factors, including the size of the gas molecules and the size of the pores in the container. Generally, smaller gas molecules can escape more quickly through smaller pores.
Hydrogen has a smaller molecular size compared to sulfur dioxide . The molecular weight of hydrogen is 2 g/mol, while the molecular weight of sulfur dioxide is 64 g/mol. Due to its smaller size, hydrogen molecules can pass through smaller pores more easily than sulfur dioxide molecules.
The exact ratio of how much faster hydrogen escapes compared to sulfur dioxide would depend on the specific conditions and the properties of the porous container.
Learn more about sulfur dioxide here:
brainly.com/question/9720549
#SPJ11.
When discussing distances between objects in the solar system, which term do you use? (2 points)
Group of answer choices
Actual distance
Apparent brightness
Relative brightness
Relative distanc
Answers
When discussing distance in the solar system,you use Relative Distance.This tells you the space between two objects with location.
D. Relative distance
The relative distance is the distance that you are felt to cover up, taking the time used to obtain there. Distance relative to a particular reference point, typically one in motion.
Relative distance is calculated measuring distance, using metrics such as time, effort, or cost.
In space, Relative distance means how far apart the planets are when compared to each other and the sun.
Thus, the correct option is D.
Learn more:
brainly.com/question/16347919
How is the glucose level in the blood maintained? Which body system, organs, and hormones are used and what do they do?
Answers
Answer:
Explanation:
Insulin is an hormone used to regulate blood glucose, as it helps to maintain a balance. It allows for transport of glucose to organs such as liver.
The process of glucose regulation is a complex process. When food is eating glucose is absorbed into the bloodstream this happen from the gut and it raises the blood glucose level this causes insulin(hormone) to be released from the pancreas so glucose can move inside the cells and be used.
As glucose moves inside the cells, the glucose level inside the bloodstream returns to normal and insulin release slows down.
Glucose which is the main energy source used by cells is allowed to be taken up by muscles, liver and fat (adipose tissue) and use as a source of energy so they can function properly.
Which statement describes a condensation reaction?
A. monomers break away when one forms a double bond monomers break away with the addition of a water molecule.
B. Two monomers combine when one adds to the double bond of another.
C. Two monomers form a new bond with the loss of a water molecule .
Answers
The statement that describes a CONDENSATION reaction is that two monomers form a new bond with the loss of a water molecule . That is option C.
CONDENSATION REACTION involves the combination of two or more molecules(monomers) of water. In reaction, a new bond is usually formed.
The characteristics of a condensation reaction includes:
formation of complex molecules (combination of two smaller monomers),water is usually given off as by product it requires a catalyst for a complete reaction to occurA reaction is called a condensation reaction because a small molecule such as water is released as a byproduct.
A typical example of a condensation reaction is the condensation of amino acids to form dipeptide. The −OH from the carboxyl group of one amino acid combines with a hydrogen atom from the amine group of the other amino acid to produce water.
Therefore, the statement that describes a CONDENSATION reaction is that two monomers form a new bond with the loss of a water molecule. That is option C
Learn more about condensation here:
https://brainly.com/question/16350693
What is the number of protons for 2^1H?
Answers
Emissions of sulphur dioxide by industry set off chemical changes in the atmosphere that result in acid rain. The acidity of liquids is measured by pH on a scale from 0 to 14. Distilled water has pH of 7.0 and lower pH values indicate acidity. Theory suggests that the pH of rain varies among rainy days according to a normal distribution with mean 5.4 and standard deviation 0.5. Besides the sample standard deviation 0.8, the same random sample of rain water of 21 days also shows a sample mean of 4.7. You would like to test if the population mean pH of rain water is indeed equal to 5.4 as the theory suggests. At α=0.05, what is the test statistic and what are the critical values? Test statistic: −4.01. Critical values: −2.08 and 2.08. Test statistic: −6.42. Critical values: −2.08 and 2.08. Test statistic: −4.01. Critical values: −2.086 and 2.086. Test statistic: −6.42. Critical values: −2.086 and 2.086.
Answers
After the calculating we have Test statistic: -3.874.
Critical values: -2.086 and 2.086.
To test if the population mean pH of rainwater is equal to 5.4, we can perform a one-sample t-test.
We have the data:
Population mean (μ) = 5.4
Sample mean (x) = 4.7
Sample standard deviation (s) = 0.8
Sample size (n) = 21
Significance level (α) = 0.05
To calculate the test statistic, we can use the formula:
t = (sample mean - population mean) / (sample standard deviation / sqrt(sample size))
Plugging in the values:
t = (4.7 - 5.4) / (0.8 / √(21))
Calculating:
t ≈ (-0.7) / (0.8 / 4.582)
t ≈ -3.874
The test statistic is approximately -3.874.
To find the critical values, we need to refer to the t-distribution table or use statistical software. At a significance level of α = 0.05 with (n-1) degrees of freedom (n = sample size), the critical values for a two-tailed test are approximately -2.086 and 2.086.
Therefore, the correct answer is:
Test statistic: -3.874.
Critical values: -2.086 and 2.086.
Learn more about Test statistic
https://brainly.com/question/31746962
#SPJ11
Argon, neon, and xenon are examples of _________.
Answers
Answer: Argon, neon, and xenon are examples of noble gases.
The noble gases (Group 18), which are found at the far right of the periodic table,Argon, neon, and xenon are examples of noble or inert gases.
What are inert gases ?A gas is said to be inert if it does not easily undergo chemical reactions with other chemicals and does not easily produce chemical compounds as a result. The noble gases, formerly known as the inert gases, frequently do not react with a wide variety of substances.
Any one of the seven chemical elements that compose Group 18 (VIII a) of the periodic table is referred to as a noble gas. Helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), radon (Rn), and oganesson are the constituent elements (Og).
Due to their filled valence shells (octets), which render them incredibly nonreactive, the noble gases (Group 18), which are found at the far right of the periodic table, were formerly known as the "inert gases."
Thus, Argon, neon, and xenon are examples of noble or inert gases.
To learn more about inert gases, follow the link;
https://brainly.com/question/11234981
#SPJ2
What two properties of sound remain the same when sound quality differs? Check all that apply.
Answers
Answer: I don’t know sorry
Explanation:
(i) CH2=CH-CH2-CH=CH,
Give IUPAC name of the compound.
Answers
Answer:
The IUPAC name of CH3 – CH2 – CH2 – CH=CH2 is Pent-1-ene.
positron emission tomography (pet) and functional magnetic resonance imaging (mri) are technologies that enable social psychologists to
Answers
Positron Emission Tomography (PET) and Functional Magnetic Resonance Imaging (fMRI) are technologies that enable social psychologists to examine the brain’s activity in real-time.
PET and fMRI have many applications in the field of social psychology as they allow researchers to examine the brain’s activity in real-time when participants are engaged in social activities. PET imaging is used to measure brain activity by detecting the gamma rays produced by the positron emitted by the radioisotope injected into the subject's bloodstream, while fMRI uses magnetic fields to detect changes in blood flow and oxygen consumption in the brain.
These imaging technologies allow researchers to identify which areas of the brain are activated when a participant is engaged in social interactions, such as experiencing empathy, making decisions, or experiencing emotions. This allows researchers to understand how the brain processes social information and can inform our understanding of how social behavior is generated and regulated. So therefore Positron Emission Tomography (PET) and Functional Magnetic Resonance Imaging (fMRI) are two of the most commonly used imaging technologies in modern neuroscience research.
Learn more about fMRI at:
https://brainly.com/question/32749214
#SPJ11
Which do you think has more mass, 1 mole of fructose, 1 mole of sucrose or 1 mole of aspartame? Explain your reasoning.
Answers
Answer:
i think they would be all the same
Explanation:
they sound like sugars
How to convert nC to C?
Answers
To convert from nanocoulombs to coulombs, divide the number of nanocoulombs by 10^9.
The conversion between nanocoulombs (nC) and coulombs (C) is based on the fact that 1 coulomb is equal to 10^9 (1 billion) nanocoulombs.
Conversely, to convert from coulombs to nanocoulombs, multiply the number of coulombs by 10^9. For example, if you have 0.5 coulombs, this is equal to 0.5 x 10^9 = 500,000,000 nanocoulombs.
The coulomb is the standard unit of electric charge in the International System of Units (SI), and is used to measure the amount of electric charge in a system. The nanocoulomb is a subunit of the coulomb, and is used to measure small amounts of electric charge.
Conversion between nanocoulombs and coulombs is important in many areas of physics and engineering, including electricity, electronics, and electrical engineering. Understanding the relationship between these units and being able to accurately convert between them is critical for accurate and precise measurement and calculation.
To know more about nanocoulombs click here:
https://brainly.com/question/14480666#
#SPJ11
How did the Heisenberg uncertainty principle contribute to the idea that electrons occupy “clouds," or "orbitals”?
Answers
Answer:
Because the exact position of the electron is not known,it must be assumed that the electron takes up the entire space in an orbital.
Explanation:
c2h5n lewis structure
Answers
Lewis structure of compound with molecular formula
What is Lewis structure?
It defines nature of bond and position of atoms of the molecule which are connected in the molecule.
Lewis dot structures also called electron dot structures are diagrams that describe chemical bonding between atoms in a molecule. They also display total number of lone pairs present in each of the atoms that constitute the molecule. Lewis dot structures are commonly referred to as electron dot structures Lewis defined a base as an electron pair donor and acid as an electron pair acceptor.c2h5n is shown below
learn more about Lewis structure at
https://brainly.com/question/20300458
#SPJ1
diamond is a natural form of pure carbon. what number of atoms of carbon are in a 1.00-carat diamond (1.00 carat 0.200 g)?
Answers
A 1.00-carat diamond, which weighs 0.200 grams, contains approximately 1.204 × 10^21 atoms of carbon. Diamond is a natural form of pure carbon and is composed of a lattice structure of carbon atoms.
Diamond is a crystalline form of carbon where each carbon atom is covalently bonded to four neighboring carbon atoms in a tetrahedral arrangement. The molar mass of carbon is approximately 12.01 grams/mol. To determine the number of carbon atoms in a 1.00-carat diamond, we need to calculate the number of moles of carbon and then convert it to the number of atoms.
First, we calculate the number of moles of carbon in the 0.200 grams of diamond using the formula:
moles = mass (in grams) / molar mass
moles = 0.200 g / 12.01 g/mol ≈ 0.01665 mol
Next, we use Avogadro's number, which states that there are approximately 6.022 × 10^23 entities (atoms, molecules, or ions) in one mole of a substance. Multiplying the number of moles by Avogadro's number gives us the number of atoms:
number of atoms = moles × Avogadro's number
number of atoms = 0.01665 mol × 6.022 × 10^23 atoms/mol ≈ 1.204 × 10^21 atoms
Therefore, a 1.00-carat diamond, weighing 0.200 grams, contains approximately 1.204 × 10^21 atoms of carbon.
Learn more about covalently bonded here :
brainly.com/question/33425898
#SPJ11
If a man with long eyelashes (LL) marries a woman with long eyelashes (Ll), what are the possible genotypes and phenotypes of their children?
Answers
Answer:
Long eyelashes
Explanation:
it would be long eyelashes unless somewhere in the family tree has short eyelashes.
The possible genotypes of their children would be LL (homozygous dominant) and Ll (heterozygous), and the possible phenotype would be long eyelashes
When a man with the genotype LL (homozygous dominant) for long eyelashes marries a woman with the genotype Ll (heterozygous) for long eyelashes, their children can have different genotypes and phenotypes.
The possible genotypes of their children can be:
LL (homozygous dominant): In this case, the child inherits the dominant allele from both parents and will have long eyelashes.
Ll (heterozygous): In this case, the child inherits one dominant allele from the father and one recessive allele from the mother. They will also have long eyelashes, as the dominant allele (L) determines the trait.
The possible phenotypes of their children would be:
Long eyelashes: Both the LL genotype and Ll genotype would result in the child having long eyelashes.
In summary, the possible genotypes of their children would be LL (homozygous dominant) and Ll (heterozygous), and the possible phenotype would be long eyelashes.
Learn more about genotypes from the link given below.
https://brainly.com/question/14928544
#SPJ2
Which statement is true about the environment
of most of Earth?
(1) It is usually greatly unbalanced.
(2) It is usually in equilibrium and hard
to change.
(3) It is usually in equilibrium but easy to change
on a small scale.
(4) It is normally heavily polluted by natural
occurrences.
Answers
The statement true about the environment of most of the earth is that it usually in equilibrium but easy to change on a small scale.
The balance between the energy flowing in from the Sun and the energy leaving the Earth is known as the earth-atmosphere energy balance. Both shortwave and ultraviolet energy are emitted when the Sun releases energy. When it gets to the Earth, some of it is absorbed by the atmosphere, some is reflected back to space by clouds, and some is absorbed at the surface of the planet.The global energy balance is particularly dependent on the absorption of infrared radiation that the Earth is trying to send back into space.The moon, which has no atmosphere, has an average surface temperature of 0°F (-18°C). The average surface temperature of the Earth is 59°F (15°C), in comparison. This effect is called green house effect.This Equilibrium of Earth and atmosphere can change with variation in green house gases.Therefore, Option 3 is correct statement
Learn more about Green house effect here:
https://brainly.com/question/19521661
#SPJ9
Ice at 0.0°C is mixed with 7.30 × 10^2 mL of water at 25.0°C. How much ice must melt to lower the water temperature to 0.0°C? The specific heat capacity of water is 4.186 J/(g·K). Latent heat of fusion for water is 333.7 J/g.
Answers
Approximately 35.90 grams of ice must melt to lower the water temperature to 0.0°C.
To solve this problem, we need to calculate the amount of heat that needs to be transferred from the water to the ice in order to lower the water temperature to 0.0°C.
First, let's calculate the initial heat content of the water. The specific heat capacity of water is 4.186 J/(g·K), and the mass of the water can be calculated using its density (1 g/mL) and volume (7.30 × 10^2 mL):
Mass of water = density × volume = 1 g/mL × 7.30 × 10^2 mL = 7.30 × 10^2 g
The initial heat content of the water can be calculated using the formula:
Heat content = mass × specific heat capacity × temperature change
Heat content = 7.30 × 10^2 g × 4.186 J/(g·K) × (25.0°C - 0.0°C) = 7.30 × 10^2 g × 4.186 J/(g·K) × 25.0°C
Next, we need to calculate the amount of heat that needs to be transferred from the water to the ice to lower the water temperature to 0.0°C. This heat transfer occurs during the melting of the ice.
The amount of heat required to melt the ice can be calculated using the formula:
Heat = mass of ice melted × latent heat of fusion
Let's assume that x grams of ice melts. The mass of the ice can be calculated using its density (0.92 g/mL) and volume (same as the volume of water):
Mass of ice = density × volume = 0.92 g/mL × 7.30 × 10^2 mL = 6.716 × 10^2 g
Heat = x g × 333.7 J/g
Now, we need to ensure that the heat transferred from the water to the ice is enough to lower the water temperature to 0.0°C. The heat transferred from the water to the ice is equal to the heat transferred from the water when its temperature drops to 0.0°C:
Heat content of water = Heat transferred to ice
7.30 × 10^2 g × 4.186 J/(g·K) × 25.0°C = x g × 333.7 J/g
Now, we can solve for x:
x = (7.30 × 10^2 g × 4.186 J/(g·K) × 25.0°C) / (333.7 J/g)
x ≈ 35.90 g
Therefore, approximately 35.90 grams of ice must melt to lower the water temperature to 0.0°C.
Learn more about temperature
https://brainly.com/question/27944554
#SPJ11
25 POINTS
Waves are rhythmic disturbances that carry energy through matter or space without transferring___.
Answers
Waves are rhythmic disturbances that carry energy through matter or space without transferring matter,
What are waves?
Waves are disturbance that occur in a medium that tranfers energy as it is being propageated but wihout a pearmament displacement of the partcle of the medium.
There are two main types of waves, namely:
Mechanical waves - these are waves that require a materila medium for their propagation. For example, soud waves and water waves.
Electromagnetic waves - these are waved that do not require a metarial medium for their propagetion. For example, light waves and radio waves.
Learn more about waves at: https://brainly.com/question/26116832
#SPJ1
Which one of the following silicate groups has tetrahedron arranged in sheets? Olivine Amphiboles Micas Feldspars
Answers
Micas is the silicate group that has tetrahedron arranged in sheets. Micas belong to a group of silicate minerals known as phyllosilicates or sheet silicates.
In phyllosilicates or sheet silicates, the tetrahedral silicate units are arranged in sheets or layers. The sheets consist of interconnected tetrahedra, with each tetrahedron sharing three oxygen atoms with adjacent tetrahedra. The remaining oxygen atom in each tetrahedron is bonded to other elements such as aluminum or magnesium.
The sheet structure of micas gives them unique properties, including a characteristic sheet-like cleavage and the ability to split into thin, flexible flakes. This property is exploited in the commercial use of micas in products like electrical insulators, heat shields, and decorative materials.
Olivine, Amphiboles, and Feldspars do not have tetrahedral arrangements in sheets. Olivine is a silicate mineral with a three-dimensional structure, while Amphiboles and Feldspars have more complex crystal structures that do not involve tetrahedral sheets.
To know more about tetrahedron, click here, https://brainly.com/question/11946461
#SPJ11
balancing chemical equation helpp me H3PO4+KOH---> K3PO4+H2O some one balance this please help me
Answers
Answer:
H3PO4 + 3KOH -> K3PO4 + 3H20
Answer:
hope its helpful to uh....
which solid from the table is the most dense ?
please help
Answers
Answer:
1.5g/cm³
Explanation:
None needed :)
Answer:
It should be Solid B.
Explanation:
Which of the following is NOT part of Dalton's Atomic Theory?
1. Atoms are composed of tiny subatomic particles.
2. Atoms that combine do so in simple, whole-number ratios.
3. All elements are composed of atoms.
4. Atoms of the same element are identical.
Answers
Answer: The statement that theatoms are made up of protons, neutrons, and electrons is not a part of Dalton's atomic theory. Therefore, option c is correct.
Explanation:
Ill in the blank with the correct number to balance the equation: ___KClO3 → 2KCl 3O2. (Enter only a whole number. )
Numerical Anwer Expected!
Anwer for Blank 1:
Answers
Correct number to balance the equation: ___KClO3 → 2KCl 3O2 is "2".
We obtain KCl and oxygen gas from the breakdown of potassium chlorate (KClO3).
1.5 moles of O2 gas and one mole of KCl are produced from one mole of KClO3.
Therefore, the response will be:
KCL)3 - - > KCL + 3/2 O2
The entire equation will be multiplied by two in order to transform the fractional coefficient to a whole number.
2X [ KCLO3 - - > KCL + 3/2 O2 ]
A balanced equation will therefore be:
2KCLO3 - - > 2KCL + 3 O2
KClO3's coefficient is therefore "2".
To learn more about Equation Please click on the given link:
https://brainly.com/question/11904811
#SPJ4
what is it called when a substance that is dissolved in liquid
Answers
Draw the structure for 1,3-dinitrocyclopentane, making sure to add all non-zero formal charges
Answers
In the image provided below, you can see the structure of 1,3-dinitrocyclopentane.
We can conclude the following information from the compound's name, 1,3-dinitrocyclopentane, which will assist us in drawing the structure :-
1,3 - position of NO₂ groups, di - two, nitro - NO₂, clo - cyclic, pentane - five.
➤ The following are the general steps for drawing any compound's Lewis structure:
Calculate the number of carbons and hydrogens.Connect the carbons with one another.Add the hydrogens and check that each carbon has four bonds and thus meets the octet rule.According to the Octet Rule almost all atoms, in this case, carbon must always have four bonds because they are most stable with eight total electrons.
Find more on cyclopentane at : brainly.com/question/13255240
#SPJ4
7. What is the coefficient for phosphoric acid when the equation below is balanced?
KOH(aq) + H₂PO4(ag) → K3PO4(ag) + H₂O(1)
4
2
3
1
Answers
KOH(aq) + H3PO4(ag) → K3PO4(ag) + H₂O
the coefficient of the phosphoric acid from the above equation was 1
Explain about phosphoric acid ?
Phosphoric acid (orthophosphoric acid, monophosphoric acid, or phosphoric(V) acid) is a colourless, odorless phosphorus-containing solid and inorganic substance having the chemical formula H3PO4. It is most usually seen as an 85% aqueous solution, which is a colourless, odourless, non-volatile syrupy liquid. It is an important industrial chemical that is found in many fertilisers.
The compound is an acid. The phosphate ion PO 34 is formed when all three H+ ions are removed. The removal of one or two protons yields the dihydrogen phosphate ion H2PO - 4 and the hydrogen phosphate ion HPO 2 4, respectively. Phosphoric acid creates esters known as organophosphates.
The term "orthophosphoric acid" can be used to distinguish this acid from other "phosphoric acids," such as pyrophosphoric acid. Nonetheless, the word "phosphoric acid" refers to this particular molecule.
the balanced equation was
3 KOH(aq) + H₂PO4(ag) → K3PO4(ag) + 3 H₂O(1)
so the coeffecient of the phosphoric acid was 1
To learn more about phosphoric acid follow the given link: https://brainly.com/question/2784465
#SPJ1
Choose the paramagnetic species from below.
Ar
O
Ti4+
All of the above are paramagnetic.
None of the above are paramagnetic.
Answers
The correct answer is option (c) Ti4+.
The species which are attracted to a magnetic field are known as paramagnetic species. If we talk about the given options, then we can see that there are only 3 species that are given. Out of these three, only Ti4+ is paramagnetic. How can we determine whether a species is paramagnetic or not? The species which contain unpaired electrons are paramagnetic in nature. If there are all paired electrons, then the species are diamagnetic. If we talk about Ti4+, then it contains 2 unpaired electrons, which makes it paramagnetic. This is the reason why the correct answer is Ti4+.In Ar, all the electrons are paired, which makes it diamagnetic. In O, there are 2 unpaired electrons, which makes it paramagnetic. How can we determine whether a species is paramagnetic or not? The species which contain unpaired electrons are paramagnetic in nature. If there are all paired electrons, then the species are diamagnetic.
Learn more about paramagnetic species at brainly.com/question/29990302
#SPJ11
Explain how the structure of the hydrocarbon tail of catechols in urushiol impacts the severity of an allergic response.
Answers
Urushiol is a mixture of catechol derivatives that is found in plants such as poison ivy, poison oak, and poison sumac. The severity of an allergic response to urushiol is largely determined by the structure of the hydrocarbon tail of catechols in urushiol.
A lengthy chain of carbon atoms with a variable number of double bonds makes up the hydrocarbon tail of catechols in urushiol. The catechol is more reactive and more likely to result in an allergic reaction if the hydrocarbon tail contains more double bonds.
This is due to the fact that catechols are known to be extremely reactive substances that readily oxidise and produce reactive intermediates that might harm tissue. Catechols' hydrocarbon tails have double bonds that make them more vulnerable to oxidation, which raises their reactivity and increases the possibility that allergic reactions would result.
Additionally, the length of the hydrocarbon tail can also affect the severity of an allergic response to urushiol. Longer hydrocarbon tails can make the molecule more lipophilic, which allows it to penetrate deeper into the skin and increase the severity of the allergic reaction.
In conclusion, the structure of the hydrocarbon tail of catechols in urushiol plays a critical role in determining the severity of an allergic response. Catechols with longer and more reactive hydrocarbon tails are more likely to cause severe allergic reactions.
For more such questions on Urushiol
https://brainly.com/question/26728366
#SPJ11
Which component of phospholipids can form hydrogen bonds?
Answers
The phosphate head group in phospholipids can form hydrogen bonds. Hydrogen bonding occurs between the phosphate group and other molecules or functional groups capable of hydrogen bonding.
Phospholipids are composed of a hydrophilic head group and hydrophobic fatty acid tails. The head group of phospholipids contains a phosphate group, which is polar and carries a negative charge. This phosphate group is capable of forming hydrogen bonds with other polar molecules or functional groups, such as water molecules. Hydrogen bonding occurs when the partially positive hydrogen atom of one molecule interacts with the partially negative atom, such as oxygen or nitrogen, of another molecule. In the case of phospholipids, the phosphate group can participate in hydrogen bonding interactions, contributing to the overall structure and properties of the phospholipid molecule.
To learn more about phospholipid : brainly.com/question/30414447
#SPJ11